root@kali:~# man arpaname
ARPANAME(1) BIND 9 ARPANAME(1)
NAME
arpaname - translate IP addresses to the corresponding ARPA names
SYNOPSIS
arpaname {ipaddress ...}
DESCRIPTION
arpaname translates IP addresses (IPv4 and IPv6) to the corresponding
IN-ADDR.ARPA or IP6.ARPA names.
SEE ALSO
BIND 9 Administrator Reference Manual.
Author
Internet Systems Consortium
Copyright
2026, Internet Systems Consortium
9.20.23-1-Debian 2026-05-08 ARPANAME(1)
root@kali:~# ddns-confgen -h Usage: ddns-confgen [-a alg] [-k keyname] [-q] [-s name | -z zone] -a alg: algorithm (default hmac-sha256) -k keyname: name of the key as it will be used in named.conf -s name: domain name to be updated using the created key -z zone: name of the zone as it will be used in named.conf -q: quiet mode: print the key, with no explanatory text
root@kali:~# dnssec-importkey -h
Usage:
dnssec-importkey options [-K dir] keyfile
dnssec-importkey options -f file [keyname]
Version: 9.20.23-1-Debian
Options:
-f file: read key from zone file
-K <directory>: directory in which to store the key files
-L ttl: set default key TTL
-v <verbose level>
-V: print version information
-h: print usage and exit
Timing options:
-P date/[+-]offset/none: set/unset key publication date
-P sync date/[+-]offset/none: set/unset CDS and CDNSKEY publication date
-D date/[+-]offset/none: set/unset key deletion date
-D sync date/[+-]offset/none: set/unset CDS and CDNSKEY deletion date
root@kali:~# named -h
usage: named [-4|-6] [-c conffile] [-d debuglevel] [-D comment] [-E engine]
[-f|-g] [-L logfile] [-n number_of_cpus] [-p port] [-s]
[-S sockets] [-t chrootdir] [-u username] [-U listeners]
[-m {usage|trace|record}]
[-M fill|nofill]
usage: named [-v|-V|-C]
named: unknown option '-h'
root@kali:~# named-journalprint -h named-journalprint: illegal option -- h Usage: named-journalprint [-dux] journal
root@kali:~# man named-nzd2nzf
NAMED-NZD2NZF(1) BIND 9 NAMED-NZD2NZF(1)
NAME
named-nzd2nzf - convert an NZD database to NZF text format
SYNOPSIS
named-nzd2nzf {filename}
DESCRIPTION
named-nzd2nzf converts an NZD database to NZF format and prints it to
standard output. This can be used to review the configuration of zones
that were added to named <#std-iscman-named> via rndc addzone <#
cmdoption-rndc-arg-addzone>. It can also be used to restore the old file
format when rolling back from a newer version of BIND to an older version.
ARGUMENTS
filename
This is the name of the .nzd file whose contents should be printed.
SEE ALSO
BIND 9 Administrator Reference Manual.
Author
Internet Systems Consortium
Copyright
2026, Internet Systems Consortium
9.20.23-1-Debian 2026-05-08 NAMED-NZD2NZF(1)
root@kali:~# named-rrchecker --help named-rrchecker: illegal option -- - usage: named-rrchecker [-o origin] [-hpCPTu] -h: print this help message -o origin: set origin to be used when interpreting the record -p: print the record in canonical format -C: list the supported class names -P: list the supported private type names -T: list the supported standard type names -u: print the record in unknown record format
root@kali:~# nsec3hash -h
nsec3hash: illegal option -- h
Usage: nsec3hash salt algorithm iterations domain
nsec3hash -r algorithm flags iterations salt domain
root@kali:~# tsig-keygen -h Usage: tsig-keygen [-a alg] [keyname] -a alg: algorithm (default hmac-sha256)
root@kali:~# delv -h
Usage: delv [@server] {q-opt} {d-opt} [domain] [q-type] [q-class]
Where: domain is in the Domain Name System
q-class is one of (in,hs,ch,...) [default: in]
q-type is one of (a,any,mx,ns,soa,hinfo,axfr,txt,...) [default:a]
q-opt is one of:
-4 (use IPv4 query transport only)
-6 (use IPv6 query transport only)
-a anchor-file (specify root trust anchor)
-b address[#port] (bind to source address/port)
-c class (option included for compatibility;
-d level (set debugging level)
-h (print help and exit)
-i (disable DNSSEC validation)
-m (enable memory usage debugging)
-p port (specify port number)
-q name (specify query name)
-t type (specify query type)
only IN is supported)
-v (print version and exit)
-x dot-notation (shortcut for reverse lookups)
d-opt is of the form +keyword[=value], where keyword is:
+[no]all (Set or clear all display flags)
+[no]class (Control display of class)
+[no]comments (Control display of comment lines)
+[no]crypto (Control display of cryptographic
fields in records)
+[no]dlv (Obsolete)
+[no]dnssec (Display DNSSEC records)
+[no]mtrace (Trace messages received)
+[no]ns (Run internal name server)
+[no]multiline (Print records in an expanded format)
+[no]qmin[=mode] (QNAME minimization: relaxed or strict)
+[no]root (DNSSEC validation trust anchor)
+[no]rrcomments (Control display of per-record comments)
+[no]rtrace (Trace resolver fetches)
+[no]short (Short form answer)
+[no]split=## (Split hex/base64 fields into chunks)
+[no]strace (Trace messages sent)
+[no]tcp (TCP mode)
+[no]ttl (Control display of ttls in records)
+[no]trust (Control display of trust level)
+[no]unknownformat (Print RDATA in RFC 3597 "unknown" format)
+[no]vtrace (Trace validation process)
+[no]yaml (Present the results as YAML)
root@kali:~# dig -h
Usage: dig [@global-server] [domain] [q-type] [q-class] {q-opt}
{global-d-opt} host [@local-server] {local-d-opt}
[ host [@local-server] {local-d-opt} [...]]
Where: domain is in the Domain Name System
q-class is one of (in,hs,ch,...) [default: in]
q-type is one of (a,any,mx,ns,soa,hinfo,axfr,txt,...) [default:a]
(Use ixfr=version for type ixfr)
q-opt is one of:
-4 (use IPv4 query transport only)
-6 (use IPv6 query transport only)
-b address[#port] (bind to source address/port)
-c class (specify query class)
-f filename (batch mode)
-k keyfile (specify tsig key file)
-m (enable memory usage debugging)
-p port (specify port number)
-q name (specify query name)
-r (do not read ~/.digrc)
-t type (specify query type)
-u (display times in usec instead of msec)
-x dot-notation (shortcut for reverse lookups)
-y [hmac:]name:key (specify named base64 tsig key)
d-opt is of the form +keyword[=value], where keyword is:
+[no]aaflag (Set AA flag in query (+[no]aaflag))
+[no]aaonly (Set AA flag in query (+[no]aaflag))
+[no]additional (Control display of additional section)
+[no]adflag (Set AD flag in query (default on))
+[no]all (Set or clear all display flags)
+[no]answer (Control display of answer section)
+[no]authority (Control display of authority section)
+[no]badcookie (Retry BADCOOKIE responses)
+[no]besteffort (Try to parse even illegal messages)
+bufsize[=###] (Set EDNS0 Max UDP packet size)
+[no]cdflag (Set checking disabled flag in query)
+[no]class (Control display of class in records)
+[no]cmd (Control display of command line -
global option)
+[no]coflag (Set compact denial of existence ok flag)
in query)
+[no]comments (Control display of packet header
and section name comments)
+[no]cookie (Add a COOKIE option to the request)
+[no]crypto (Control display of cryptographic
fields in records)
+[no]defname (Use search list (+[no]search))
+[no]dns64prefix (Get the DNS64 prefixes from ipv4only.arpa)
+[no]dnssec (Request DNSSEC records)
+domain=### (Set default domainname)
+[no]edns[=###] (Set EDNS version) [0]
+ednsflags=### (Set undefined EDNS flag bits)
+[no]ednsnegotiation (Set EDNS version negotiation)
+ednsopt=###[:value] (Send specified EDNS option)
+noednsopt (Clear list of +ednsopt options)
+[no]expandaaaa (Expand AAAA records)
+[no]expire (Request time to expire)
+[no]fail (Don't try next server on SERVFAIL)
+[no]header-only (Send query without a question section)
+[no]https[=###] (DNS-over-HTTPS mode) [/]
+[no]https-get (Use GET instead of default POST method
while using HTTPS)
+[no]http-plain[=###] (DNS over plain HTTP mode) [/]
+[no]http-plain-get (Use GET instead of default POST method
while using plain HTTP)
+[no]identify (ID responders in short answers)
+[no]idn (convert international domain names)
+[no]ignore (Don't revert to TCP for TC responses.)
+[no]keepalive (Request EDNS TCP keepalive)
+[no]keepopen (Keep the TCP socket open between queries)
+[no]multiline (Print records in an expanded format)
+ndots=### (Set search NDOTS value)
+[no]nsid (Request Name Server ID)
+[no]nssearch (Search all authoritative nameservers)
+[no]onesoa (AXFR prints only one soa record)
+[no]opcode=### (Set the opcode of the request)
+padding=### (Set padding block size [0])
+[no]proxy[=src_addr[#src_port]-dst_addr[#dst_port]]
(Add PROXYv2 headers to the queries. If
addresses are omitted, LOCAL PROXYv2
headers are added)
+[no]proxy-plain[=src_addr[#src_port]-dst_addr[#dst_port]]
(The same as'+[no]proxy', but send PROXYv2
headers ahead of any encryption if an
encrypted transport is used)
+qid=### (Specify the query ID to use when sending
queries)
+[no]qr (Print question before sending)
+[no]question (Control display of question section)
+[no]raflag (Set RA flag in query (+[no]raflag))
+[no]rdflag (Recursive mode (+[no]recurse))
+[no]recurse (Recursive mode (+[no]rdflag))
+retry=### (Set number of UDP retries) [2]
+[no]rrcomments (Control display of per-record comments)
+[no]search (Set whether to use searchlist)
+[no]short (Display nothing except short
form of answers - global option)
+[no]showbadcookie (Show BADCOOKIE message)
+[no]showbadvers (Show BADVERS message)
+[no]showsearch (Search with intermediate results)
+[no]split=## (Split hex/base64 fields into chunks)
+[no]stats (Control display of statistics)
+subnet=addr (Set edns-client-subnet option)
+[no]tcflag (Set TC flag in query (+[no]tcflag))
+[no]tcp (TCP mode (+[no]vc))
+timeout=### (Set query timeout) [5]
+[no]tls (DNS-over-TLS mode)
+[no]tls-ca[=file] (Enable remote server's TLS certificate
validation)
+[no]tls-hostname=hostname (Explicitly set the expected TLS
hostname)
+[no]tls-certfile=file (Load client TLS certificate chain from
file)
+[no]tls-keyfile=file (Load client TLS private key from file)
+[no]trace (Trace delegation down from root [implies
+dnssec])
+tries=### (Set number of UDP attempts) [3]
+[no]ttlid (Control display of ttls in records)
+[no]ttlunits (Display TTLs in human-readable units)
+[no]unknownformat (Print RDATA in RFC 3597 "unknown" format)
+[no]vc (TCP mode (+[no]tcp))
+[no]yaml (Present the results as YAML)
+[no]zflag (Set Z flag in query)
global d-opts and servers (before host name) affect all queries.
local d-opts and servers (after host name) affect only that lookup.
-h (print help and exit)
-v (print version and exit)
root@kali:~# dnstap-read -h dnstap-read: illegal option -- h dnstap-read [-mpxy] [filename] -m trace memory allocations -p print the full DNS message -t print long timestamps with millisecond precision -x use hex format to print DNS message -y print YAML format (implies -p)
root@kali:~# mdig -h
Usage: mdig @server {global-opt} host
{local-opt} [ host {local-opt} [...]]
Where:
anywhere opt is one of:
-f filename (batch mode)
-h (print help and exit)
-v (print version and exit)
global opt is one of:
-4 (use IPv4 query transport only)
-6 (use IPv6 query transport only)
-b address[#port] (bind to source address/port)
-p port (specify port number)
-m (enable memory usage debugging)
+[no]vc (TCP mode)
+[no]tcp (TCP mode, alternate syntax)
+[no]besteffort (Try to parse even illegal messages)
+[no]cl (Control display of class in records)
+[no]comments (Control display of comment lines)
+[no]rrcomments (Control display of per-record comments)
+[no]crypto (Control display of cryptographic fields in records)
+[no]question (Control display of question)
+[no]answer (Control display of answer)
+[no]authority (Control display of authority)
+[no]additional (Control display of additional)
+[no]short (Disable everything except short
form of answer)
+[no]ttlid (Control display of ttls in records)
+[no]ttlunits (Display TTLs in human-readable units)
+[no]unknownformat (Print RDATA in RFC 3597 "unknown" format)
+[no]all (Set or clear all display flags)
+[no]multiline (Print records in an expanded format)
+[no]split=## (Split hex/base64 fields into chunks)
local opt is one of:
-c class (specify query class)
-t type (specify query type)
-x dot-notation (shortcut for reverse lookups)
+timeout=### (Set query timeout) [UDP=5,TCP=10]
+udptimeout=### (Set timeout before UDP retry)
+tries=### (Set number of UDP attempts) [3]
+retry=### (Set number of UDP retries) [2]
+bufsize=### (Set EDNS0 Max UDP packet size)
+subnet=addr (Set edns-client-subnet option)
+[no]edns[=###] (Set EDNS version) [0]
+ednsflags=### (Set EDNS flag bits)
+ednsopt=###[:value] (Send specified EDNS option)
+noednsopt (Clear list of +ednsopt options)
+[no]recurse (Recursive mode)
+[no]aaonly (Set AA flag in query (+[no]aaflag))
+[no]adflag (Set AD flag in query)
+[no]cdflag (Set CD flag in query)
+[no]zflag (Set Z flag in query)
+[no]dnssec (Request DNSSEC records)
+[no]expire (Request time to expire)
+[no]cookie[=###] (Send a COOKIE option)
+[no]nsid (Request Name Server ID)
root@kali:~# man nslookup
NSLOOKUP(1) BIND 9 NSLOOKUP(1)
NAME
nslookup - query Internet name servers interactively
SYNOPSIS
nslookup [-option] [name | -] [server]
DESCRIPTION
nslookup is a program to query Internet domain name servers. nslookup has
two modes: interactive and non-interactive. Interactive mode allows the
user to query name servers for information about various hosts and domains
or to print a list of hosts in a domain. Non-interactive mode prints just
the name and requested information for a host or domain.
ARGUMENTS
Interactive mode is entered in the following cases:
a. when no arguments are given (the default name server is used);
b. when the first argument is a hyphen (-) and the second argument is the
host name or Internet address of a name server.
Non-interactive mode is used when the name or Internet address of the host
to be looked up is given as the first argument. The optional second argu-
ment specifies the host name or address of a name server.
Options can also be specified on the command line if they precede the ar-
guments and are prefixed with a hyphen. For example, to change the default
query type to host information, with an initial timeout of 10 seconds,
type:
nslookup -query=hinfo -timeout=10
The -version option causes nslookup to print the version number and imme-
diately exit.
INTERACTIVE COMMANDS
host [server]
This command looks up information for host <#std-iscman-host> using
the current default server or using server, if specified. If host
<#std-iscman-host> is an Internet address and the query type is A
or PTR, the name of the host is returned. If host <#
std-iscman-host> is a name and does not have a trailing period (.),
the search list is used to qualify the name.
To look up a host not in the current domain, append a period to the
name.
server domain | lserver domain
These commands change the default server to domain; lserver uses
the initial server to look up information about domain, while
server uses the current default server. If an authoritative answer
cannot be found, the names of servers that might have the answer
are returned.
root This command is not implemented.
finger
This command is not implemented.
ls This command is not implemented.
view This command is not implemented.
help This command is not implemented.
? This command is not implemented.
exit This command exits the program.
set keyword[=value]
This command is used to change state information that affects the
lookups. Valid keywords are:
all This keyword prints the current values of the frequently
used options to set. Information about the current default
server and host is also printed.
class=value
This keyword changes the query class to one of:
IN the Internet class
CH the Chaos class
HS the Hesiod class
ANY wildcard
The class specifies the protocol group of the information.
The default is IN; the abbreviation for this keyword is cl.
nodebug
This keyword turns on or off the display of the full re-
sponse packet, and any intermediate response packets, when
searching. The default for this keyword is nodebug; the ab-
breviation for this keyword is [no]deb.
nod2 This keyword turns debugging mode on or off. This displays
more about what nslookup is doing. The default is nod2.
domain=name
This keyword sets the search list to name.
nosearch
If the lookup request contains at least one period, but does
not end with a trailing period, this keyword appends the do-
main names in the domain search list to the request until an
answer is received. The default is search.
port=value
This keyword changes the default TCP/UDP name server port to
value from its default, port 53. The abbreviation for this
keyword is po.
querytype=value | type=value
This keyword changes the type of the information query to
value. The defaults are A and then AAAA; the abbreviations
for these keywords are q and ty.
Please note that it is only possible to specify one query
type. Only the default behavior looks up both when an alter-
native is not specified.
norecurse
This keyword tells the name server to query other servers if
it does not have the information. The default is recurse;
the abbreviation for this keyword is [no]rec.
ndots=number
This keyword sets the number of dots (label separators) in a
domain that disables searching. Absolute names always stop
searching.
retry=number
This keyword sets the number of retries to number.
timeout=number
This keyword changes the initial timeout interval to wait
for a reply to number, in seconds.
novc This keyword indicates that a virtual circuit should always
be used when sending requests to the server. novc is the
default.
nofail
This keyword tries the next nameserver if a nameserver re-
sponds with SERVFAIL or a referral (nofail), or terminates
the query (fail) on such a response. The default is nofail.
RETURN VALUES
nslookup returns with an exit status of 1 if any query failed, and 0 oth-
erwise.
IDN SUPPORT
If nslookup has been built with IDN (internationalized domain name) sup-
port, it can accept and display non-ASCII domain names. nslookup appropri-
ately converts character encoding of a domain name before sending a re-
quest to a DNS server or displaying a reply from the server. To turn off
IDN support, define the IDN_DISABLE environment variable. IDN support is
disabled if the variable is set when nslookup runs, or when the standard
output is not a tty.
FILES
/etc/resolv.conf
SEE ALSO
dig(1) <#std-iscman-dig>, host(1) <#std-iscman-host>, named(8) <#
std-iscman-named>.
Author
Internet Systems Consortium
Copyright
2026, Internet Systems Consortium
9.20.23-1-Debian 2026-05-08 NSLOOKUP(1)
root@kali:~# nsupdate --help nsupdate: illegal option -- - nsupdate: invalid argument -- usage: nsupdate [-CdDi] [-L level] [-l] [-g | -o | -y keyname:secret | -k keyfile] [-p port] [ -S [-K tlskeyfile] [-E tlscertfile] [-A tlscafile] [-H tlshostname] [-O] ] [-v] [-V] [-P] [-T] [-4 | -6] [filename]
root@kali:~# host -h
host: illegal option -- h
Usage: host [-aCdilrTvVw] [-c class] [-N ndots] [-t type] [-W time]
[-R number] [-m flag] [-p port] hostname [server]
-a is equivalent to -v -t ANY
-A is like -a but omits RRSIG, NSEC, NSEC3
-c specifies query class for non-IN data
-C compares SOA records on authoritative nameservers
-d is equivalent to -v
-l lists all hosts in a domain, using AXFR
-m set memory debugging flag (trace|record|usage)
-N changes the number of dots allowed before root lookup is done
-p specifies the port on the server to query
-r disables recursive processing
-R specifies number of retries for UDP packets
-s a SERVFAIL response should stop query
-t specifies the query type
-T enables TCP/IP mode
-U enables UDP mode
-v enables verbose output
-V print version number and exit
-w specifies to wait forever for a reply
-W specifies how long to wait for a reply
-4 use IPv4 query transport only
-6 use IPv6 query transport only
root@kali:~# dnssec-cds -h
Usage:
dnssec-cds options [options] -f <file> -d <path> <domain>
Version: 9.20.23-1-Debian
Options:
-a <algorithm> digest algorithm (SHA-1 / SHA-256 / SHA-384)
-c <class> of domain (default IN)
-D prefer CDNSKEY records instead of CDS
-d <file|dir> where to find parent dsset- file
-f <file> child DNSKEY+CDNSKEY+CDS+RRSIG records
-i[extension] update dsset- file in place
-s <start-time> oldest permitted child signatures
-u emit nsupdate script
-T <ttl> TTL of DS records
-V print version
-v <verbosity>
root@kali:~# dnssec-dsfromkey -h
Usage:
dnssec-dsfromkey [options] keyfile
dnssec-dsfromkey [options] -f zonefile [zonename]
dnssec-dsfromkey [options] -s dnsname
dnssec-dsfromkey [-h|-V]
Version: 9.20.23-1-Debian
Options:
-1: digest algorithm SHA-1 (deprecated)
-2: digest algorithm SHA-256
-a algorithm: digest algorithm (SHA-1 (deprecated), SHA-256 or SHA-384)
-A: include all keys in DS set, not just KSKs (-f only)
-c class: rdata class for DS set (default IN) (-f or -s only)
-C: print CDS records
-f zonefile: read keys from a zone file
-h: print help information
-K directory: where to find key or keyset files
-w split base64 rdata text into chunks
-s: read keys from keyset-<dnsname> file
-T: TTL of output records (omitted by default)
-v level: verbosity
-V: print version information
Output: DS or CDS RRs
root@kali:~# dnssec-keyfromlabel -h
Usage:
dnssec-keyfromlabel -l label [options] name
Version: 9.20.23-1-Debian
Required options:
-l label: label of the key pair
name: owner of the key
Other options:
-a algorithm:
RSASHA1 (deprecated) |
NSEC3RSASHA1 (deprecated) |
RSASHA256 | RSASHA512 |
ECDSAP256SHA256 | ECDSAP384SHA384 |
ED25519 | ED448
-3: use NSEC3-capable algorithm
-c class (default: IN)
-E <engine>:
name of an OpenSSL engine to use
-f keyflag: KSK | REVOKE
-K directory: directory in which to place key files
-k: generate a TYPE=KEY key
-L ttl: default key TTL
-M <min>:<max>: allowed Key ID range
-n nametype: ZONE | HOST | ENTITY | USER | OTHER
(DNSKEY generation defaults to ZONE
-p protocol: default: 3 [dnssec]
-t type: AUTHCONF | NOAUTHCONF | NOAUTH | NOCONF (default: AUTHCONF)
-y: permit keys that might collide
-v verbose level
-V: print version information
Date options:
-P date/[+-]offset: set key publication date
-P sync date/[+-]offset: set CDS and CDNSKEY publication date
-A date/[+-]offset: set key activation date
-R date/[+-]offset: set key revocation date
-I date/[+-]offset: set key inactivation date
-D date/[+-]offset: set key deletion date
-D sync date/[+-]offset: set CDS and CDNSKEY deletion date
-G: generate key only; do not set -P or -A
-C: generate a backward-compatible key, omitting all dates
-S <key>: generate a successor to an existing key
-i <interval>: prepublication interval for successor key (default: 30 days)
Output:
K<name>+<alg>+<id>.key, K<name>+<alg>+<id>.private
root@kali:~# dnssec-keygen -h
Usage:
dnssec-keygen [options] name
Version: 9.20.23-1-Debian
name: owner of the key
Options:
-K <directory>: write keys into directory
-k <policy>: generate keys for dnssec-policy
-l <file>: configuration file with dnssec-policy statement
-a <algorithm>:
RSASHA1 (deprecated) | NSEC3RSASHA1 (deprecated) |
RSASHA256 | RSASHA512 |
ECDSAP256SHA256 | ECDSAP384SHA384 |
ED25519 | ED448
-3: use NSEC3-capable algorithm
-b <key size in bits>:
RSASHA1 (deprecated) : [1024..4096]
NSEC3RSASHA1 (deprecated) : [1024..4096]
RSASHA256: [1024..4096]
RSASHA512: [1024..4096]
ECDSAP256SHA256: ignored
ECDSAP384SHA384: ignored
ED25519: ignored
ED448: ignored
(key size defaults are set according to
algorithm and usage (ZSK or KSK)
-n <nametype>: ZONE | HOST | ENTITY | USER | OTHER
(DNSKEY generation defaults to ZONE)
-c <class>: (default: IN)
-d <digest bits> (0 => max, default)
-E <engine>:
name of an OpenSSL engine to use
-f <keyflag>: ZSK | KSK | REVOKE
-F: FIPS mode
-L <ttl>: default key TTL
-M <min>:<max>: allowed Key ID range
-p <protocol>: (default: 3 [dnssec])
-s <strength>: strength value this key signs DNS records with (default: 0)
-T <rrtype>: DNSKEY | KEY (default: DNSKEY; use KEY for SIG(0))
-t <type>: AUTHCONF | NOAUTHCONF | NOAUTH | NOCONF (default: AUTHCONF)
-h: print usage and exit
-m <memory debugging mode>:
usage | trace | record
-v <level>: set verbosity level (0 - 10)
-V: print version information
Timing options:
-P date/[+-]offset/none: set key publication date (default: now)
-P sync date/[+-]offset/none: set CDS and CDNSKEY publication date
-A date/[+-]offset/none: set key activation date (default: now)
-R date/[+-]offset/none: set key revocation date
-I date/[+-]offset/none: set key inactivation date
-D date/[+-]offset/none: set key deletion date
-D sync date/[+-]offset/none: set CDS and CDNSKEY deletion date
-G: generate key only; do not set -P or -A
-C: generate a backward-compatible key, omitting all dates
-S <key>: generate a successor to an existing key
-i <interval>: prepublication interval for successor key (default: 30 days)
Output:
K<name>+<alg>+<id>.key, K<name>+<alg>+<id>.private
root@kali:~# dnssec-ksr -h
Usage:
dnssec-ksr options [options] <command> <zone>
Version: 9.20.23-1-Debian
Options:
-E <engine>: name of an OpenSSL engine to use
-e <date/offset>: end date
-F: FIPS mode
-f: KSR file to sign
-i <date/offset>: start date
-K <directory>: key directory
-k <policy>: name of a DNSSEC policy
-l <file>: file with dnssec-policy config
-h: print usage and exit
-V: print version information
-v <level>: set verbosity level
Commands:
keygen: pregenerate ZSKs
request: create a Key Signing Request (KSR)
sign: sign a KSR, creating a Signed Key Response (SKR)
root@kali:~# dnssec-revoke -h
Usage:
dnssec-revoke [options] keyfile
Version: 9.20.23-1-Debian
-E engine: specify OpenSSL engine
-f: force overwrite
-h: help
-K directory: use directory for key files
-r: remove old keyfiles after creating revoked version
-v level: set level of verbosity
-V: print version information
Output:
K<name>+<alg>+<new id>.key, K<name>+<alg>+<new id>.private
root@kali:~# dnssec-settime -h
Usage:
dnssec-settime [options] keyfile
Version: 9.20.23-1-Debian
General options:
-E engine: specify OpenSSL engine
-f: force update of old-style keys
-K directory: set key file location
-L ttl: set default key TTL
-v level: set level of verbosity
-V: print version information
-h: help
Timing options:
-P date/[+-]offset/none: set/unset key publication date
-P ds date/[+-]offset/none: set/unset DS publication date
-P sync date/[+-]offset/none: set/unset CDS and CDNSKEY publication date
-A date/[+-]offset/none: set/unset key activation date
-R date/[+-]offset/none: set/unset key revocation date
-I date/[+-]offset/none: set/unset key inactivation date
-D date/[+-]offset/none: set/unset key deletion date
-D ds date/[+-]offset/none: set/unset DS deletion date
-D sync date/[+-]offset/none: set/unset CDS and CDNSKEY deletion date
-S <key>: generate a successor to an existing key
-i <interval>: prepublication interval for successor key (default: 30 days)
Key state options:
-s: update key state file (default no)
-g state: set the goal state for this key
-d state date/[+-]offset: set the DS state
-k state date/[+-]offset: set the DNSKEY state
-r state date/[+-]offset: set the RRSIG (KSK) state
-z state date/[+-]offset: set the RRSIG (ZSK) state
Printing options:
-p C/P/Psync/A/R/I/D/Dsync/all: print a particular time value or values
-u: print times in unix epoch format
Output:
K<name>+<alg>+<new id>.key, K<name>+<alg>+<new id>.private
root@kali:~# dnssec-signzone -h Usage: dnssec-signzone [options] zonefile [keys] Version: 9.20.23-1-Debian Options: (default value in parenthesis) -S: smart signing: automatically finds key files for the zone and determines how they are to be used -K directory: directory to find key files (.) -d directory: directory to find dsset-* files (.) -F: FIPS mode -g: update DS records based on child zones' dsset-* files -G sync-records: what CDNSKEY and CDS to publish -s [YYYYMMDDHHMMSS|+offset]: RRSIG start time - absolute|offset (now - 1 hour) -e [YYYYMMDDHHMMSS|+offset|"now"+offset]: RRSIG end time - absolute|from start|from now (now + 30 days) -X [YYYYMMDDHHMMSS|+offset|"now"+offset]: DNSKEY RRSIG end - absolute|from start|from now (matches -e) -i interval: cycle interval - resign if < interval from end ( (end-start)/4 ) -j jitter: randomize signature end time up to jitter seconds -v debuglevel (0) -q quiet -V: print version information -o origin: zone origin (name of zonefile) -f outfile: file the signed zone is written in (zonefile + .signed) -I format: file format of input zonefile (text) -O format: file format of signed zone file (text) -N format: soa serial format of signed zone file (keep) -D: output only DNSSEC-related records -a: verify generated signatures -c class (IN) -E engine: name of an OpenSSL engine to use -P: disable post-sign verification -Q: remove signatures from keys that are no longer active -R: remove signatures from keys that no longer exist -T TTL: TTL for newly added DNSKEYs -t: print statistics -u: update or replace an existing NSEC/NSEC3 chain -x: sign DNSKEY record with KSKs only, not ZSKs -z: sign all records with KSKs -C: generate a keyset file, for compatibility with older versions of dnssec-signzone -g -n ncpus (number of cpus present) -k key_signing_key -3 NSEC3 salt -H NSEC3 additional iterations (0) -A NSEC3 optout Signing Keys: (default: all zone keys that have private keys) keyfile (Kname+alg+tag)
root@kali:~# dnssec-verify -h Usage: dnssec-verify [options] zonefile [keys] Version: 9.20.23-1-Debian Options: (default value in parenthesis) -v debuglevel (0) -q quiet -V: print version information -o origin: zone origin (name of zonefile) -I format: file format of input zonefile (text) -c class (IN) -E engine: name of an OpenSSL engine to use -x: DNSKEY record signed with KSKs only, not ZSKs -z: All records signed with KSKs
root@kali:~# named-checkconf --help named-checkconf: invalid argument -- usage: named-checkconf [-achijklvz] [-p [-x]] [-t directory] [named.conf]
root@kali:~# named-checkzone -h usage: named-checkzone [-djqvD] [-c class] [-f inputformat] [-F outputformat] [-J filename] [-s (full|relative)] [-t directory] [-w directory] [-k (ignore|warn|fail)] [-m (ignore|warn|fail)] [-n (ignore|warn|fail)] [-r (ignore|warn|fail)] [-i (full|full-sibling|local|local-sibling|none)] [-M (ignore|warn|fail)] [-S (ignore|warn|fail)] [-W (ignore|warn)] [-o filename] zonename [ (filename|-) ]
root@kali:~# named-compilezone -h usage: named-compilezone [-djqvD] [-c class] [-f inputformat] [-F outputformat] [-J filename] [-s (full|relative)] [-t directory] [-w directory] [-k (ignore|warn|fail)] [-m (ignore|warn|fail)] [-n (ignore|warn|fail)] [-r (ignore|warn|fail)] [-i (full|full-sibling|local|local-sibling|none)] [-M (ignore|warn|fail)] [-S (ignore|warn|fail)] [-W (ignore|warn)] -o filename zonename [ (filename|-) ]
root@kali:~# rndc -h
Usage: rndc [-b address] [-c config] [-s server] [-p port]
[-k key-file ] [-y key] [-r] [-V] [-4 | -6] command
command is one of the following:
addzone zone [class [view]] { zone-options }
Add zone to given view. Requires allow-new-zones option.
delzone [-clean] zone [class [view]]
Removes zone from given view.
dnssec -checkds [-key id [-alg algorithm]] [-when time] (published|withdrawn) zone [class [view]]
Mark the DS record for the KSK of the given zone as seen
in the parent. If the zone has multiple KSKs, select a
specific key by providing the keytag with -key id and
optionally the key's algorithm with -alg algorithm.
Requires the zone to have a dnssec-policy.
dnssec -rollover -key id [-alg algorithm] [-when time] zone [class [view]]
Rollover key with id of the given zone. Requires the zone
to have a dnssec-policy.
dnssec -status zone [class [view]]
Show the DNSSEC signing state for the specified zone.
Requires the zone to have a dnssec-policy.
dnssec -step zone [class [view]]
Run the key manager for a zone configured with a
dnssec-policy in manual mode, executing the operations that
had previously been blocked (if any).
dnstap -reopen
Close, truncate and re-open the DNSTAP output file.
dnstap -roll [count]
Close, rename and re-open the DNSTAP output file(s).
dumpdb [-all|-cache|-zones|-adb|-bad|-expired|-fail] [view ...]
Dump cache(s) to the dump file (named_dump.db).
fetchlimit [view]
Show servers and domains currently rate-limited to fetch limits.
flush Flushes all of the server's caches.
flush [view] Flushes the server's cache for a view.
flushname name [view]
Flush the given name from the server's cache(s)
flushtree name [view]
Flush all names under the given name from the server's cache(s)
freeze Suspend updates to all dynamic zones.
freeze zone [class [view]]
Suspend updates to a dynamic zone.
halt Stop the server without saving pending updates.
halt -p Stop the server without saving pending updates reporting
process id.
skr -import file zone [class [view]]
Import a SKR file for the specified zone, for offline KSK
signing.
loadkeys zone [class [view]]
Update keys without signing immediately.
managed-keys refresh [class [view]]
Check trust anchor for RFC 5011 key changes
managed-keys status [class [view]]
Display RFC 5011 managed keys information
managed-keys sync [class [view]]
Write RFC 5011 managed keys to disk
memprof [ on | off | dump ]
Enable / disable memory profiling or dump the profile.
Requires named to built with jemalloc and run with the relevant
MALLOC_CONF environment variables.
modzone zone [class [view]] { zone-options }
Modify a zone's configuration.
Requires allow-new-zones option.
notify zone [class [view]]
Resend NOTIFY messages for the zone.
notrace Set debugging level to 0.
nta -dump
List all negative trust anchors.
nta [-lifetime duration] [-force] domain [view]
Set a negative trust anchor, disabling DNSSEC validation
for the given domain.
Using -lifetime specifies the duration of the NTA, up
to one week.
Using -force prevents the NTA from expiring before its
full lifetime, even if the domain can validate sooner.
nta -remove domain [view]
Remove a negative trust anchor, re-enabling validation
for the given domain.
querylog [ on | off ]
Enable / disable query logging.
reconfig Reload configuration file and new zones only.
recursing Dump the queries that are currently recursing (named.recursing)
refresh zone [class [view]]
Schedule immediate maintenance for a zone.
reload Reload configuration file and zones.
reload zone [class [view]]
Reload a single zone.
reset-stats <counter-name ...>
Reset the requested statistics counter(s).
responselog [ on | off ]
Enable / disable response logging.
retransfer zone [class [view]]
Retransfer a single zone without checking serial number.
scan Scan available network interfaces for changes.
secroots [view ...]
Write security roots to the secroots file.
serve-stale [ on | off | reset | status ] [class [view]]
Control whether stale answers are returned
showzone zone [class [view]]
Print a zone's configuration.
sign zone [class [view]]
Update zone keys, and sign as needed.
signing -clear all zone [class [view]]
Remove the private records for all keys that have
finished signing the given zone.
signing -clear <keyid>/<algorithm> zone [class [view]]
Remove the private record that indicating the given key
has finished signing the given zone.
signing -list zone [class [view]]
List the private records showing the state of DNSSEC
signing in the given zone.
signing -nsec3param hash flags iterations salt zone [class [view]]
Add NSEC3 chain to zone if already signed.
Prime zone with NSEC3 chain if not yet signed.
signing -nsec3param none zone [class [view]]
Remove NSEC3 chains from zone.
signing -serial <value> zone [class [view]]
Set the zones's serial to <value>.
stats Write server statistics to the statistics file.
status Display status of the server.
stop Save pending updates to master files and stop the server.
stop -p Save pending updates to master files and stop the server
reporting process id.
sync [-clean] Dump changes to all dynamic zones to disk, and optionally
remove their journal files.
sync [-clean] zone [class [view]]
Dump a single zone's changes to disk, and optionally
remove its journal file.
tcp-timeouts Display the tcp-*-timeout option values
tcp-timeouts initial idle keepalive advertised
Update the tcp-*-timeout option values
thaw Enable updates to all dynamic zones and reload them.
thaw zone [class [view]]
Enable updates to a frozen dynamic zone and reload it.
trace Increment debugging level by one.
trace level Change the debugging level.
validation [ on | off | status ] [view]
Enable / disable DNSSEC validation.
zonestatus zone [class [view]]
Display the current status of a zone.
Version: 9.20.23-1-Debian
root@kali:~# rndc-confgen -h Usage: rndc-confgen [-a] [-b bits] [-c keyfile] [-k keyname] [-p port] [-s addr] [-t chrootdir] [-u user] -a: generate just the key clause and write it to keyfile (/etc/bind/rndc.key) -A alg: algorithm (default hmac-sha256) -b bits: from 1 through 512, default 256; total length of the secret -c keyfile: specify an alternate key file (requires -a) -k keyname: the name as it will be used in named.conf and rndc.conf -p port: the port named will listen on and rndc will connect to -q: suppress printing written key path -s addr: the address to which rndc should connect -t chrootdir: write a keyfile in chrootdir as well (requires -a) -u user: set the keyfile owner to "user" (requires -a)