hostapd-wpe

root@kali:~# hostapd-wpe --help
hostapd-wpe: invalid option -- '-'
hostapd-WPE v2.10
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2022, Jouni Malinen <j@w1.fi> and contributors
-----------------------------------------------------
WPE (Wireless Pwnage Edition)
This version has been cleverly modified to target
wired and wireless users.
Twitter: @aircrackng
Website: https://aircrack-ng.org

usage: hostapd-wpe [-hdBKtvrkc] [-P <PID file>] [-e <entropy file>] \
         [-g <global ctrl_iface>] [-G <group>]\
         [-i <comma-separated list of interface names>]\
         <configuration file(s)>

options:
   -h   show this usage
   -d   show more debug messages (-dd for even more)
   -B   run daemon in the background
   -e   entropy file
   -g   global control interface path
   -G   group for control interfaces
   -P   PID file
   -K   include key data in debug messages
   -f   log output to debug file instead of stdout
   -T   record to Linux tracing in addition to logging
        (records all messages regardless of debug verbosity)
   -i   list of interface names to use
   -s   log output to syslog instead of stdout
   -S   start all the interfaces synchronously
   -t   include timestamps in some debug messages
   -v   show hostapd version


WPE options:
   -r   Return Success where possible
   -c   Cupid Mode (Heartbleed clients)

   -k   Karma Mode (Respond to all probes)

   Note: credentials logging is always enabled

root@kali:~# hostapd-wpe_cli -h
hostapd_cli v2.10
Copyright (c) 2004-2022, Jouni Malinen <j@w1.fi> and contributors

usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvBr] [-a<path>] \
                   [-P<pid file>] [-G<ping interval>] [command..]

Options:
   -h           help (show this usage text)
   -v           shown version information
   -p<path>     path to find control sockets (default: /var/run/hostapd-wpe)
   -s<dir_path> dir path to open client sockets (default: /var/run/hostapd-wpe)
   -a<file>     run in daemon mode executing the action file based on events
                from hostapd
   -r           try to reconnect when client socket is disconnected.
                This is useful only when used with -a.
   -B           run a daemon in the background
   -i<ifname>   Interface to listen on (default: first interface found in the
                socket path)

commands:
  ping = pings hostapd
  mib = get MIB variables (dot1x, dot11, radius)
  relog = reload/truncate debug log output file
  status = show interface status info
  sta <addr> = get MIB variables for one station
  all_sta = get MIB variables for all stations
  list_sta = list all stations
  new_sta <addr> = add a new station
  deauthenticate <addr> = deauthenticate a station
  disassociate <addr> = disassociate a station
  signature <addr> = get taxonomy signature for a station
  sa_query <addr> = send SA Query to a station
  wps_pin <uuid> <pin> [timeout] [addr] = add WPS Enrollee PIN
  wps_check_pin <PIN> = verify PIN checksum
  wps_pbc = indicate button pushed to initiate PBC
  wps_cancel = cancel the pending WPS operation
  wps_nfc_tag_read <hexdump> = report read NFC tag with WPS data
  wps_nfc_config_token <WPS/NDEF> = build NFC configuration token
  wps_nfc_token <WPS/NDEF/enable/disable> = manager NFC password token
  wps_ap_pin <cmd> [params..] = enable/disable AP PIN
  wps_config <SSID> <auth> <encr> <key> = configure AP
  wps_get_status = show current WPS status
  disassoc_imminent = send Disassociation Imminent notification
  ess_disassoc = send ESS Dissassociation Imminent notification
  bss_tm_req = send BSS Transition Management Request
  get_config = show current configuration
  help = show this usage help
  interface [ifname] = show interfaces/select interface
  fst <params...> = send FST-MANAGER control interface command
  raw <params..> = send unprocessed command
  level <debug level> = change debug level
  license = show full hostapd_cli license
  quit = exit hostapd_cli
  set <name> <value> = set runtime variables
  get <name> = get runtime info
  set_qos_map_set <arg,arg,...> = set QoS Map set element
  send_qos_map_conf <addr> = send QoS Map Configure frame
  chan_switch <cs_count> <freq> [sec_channel_offset=] [center_freq1=]
    [center_freq2=] [bandwidth=] [blocktx] [ht|vht]
    = initiate channel switch announcement
  hs20_wnm_notif <addr> <url>
    = send WNM-Notification Subscription Remediation Request
  hs20_deauth_req <addr> <code (0/1)> <Re-auth-Delay(sec)> [url]
    = send WNM-Notification imminent deauthentication indication
  vendor <vendor id> <sub command id> [<hex formatted data>]
    = send vendor driver command
  enable = enable hostapd on current interface
  reload = reload configuration for current interface
  disable = disable hostapd on current interface
  update_beacon = update Beacon frame contents
  
  erp_flush = drop all ERP keys
  log_level [level] = show/change log verbosity level
  pmksa  = show PMKSA cache entries
  pmksa_flush  = flush PMKSA cache
  set_neighbor <addr> <ssid=> <nr=> [lci=] [civic=] [stat]
    = add AP to neighbor database
  show_neighbor   = show neighbor database entries
  remove_neighbor <addr> [ssid=<hex>] = remove AP from neighbor database
  req_lci <addr> = send LCI request to a station
  req_range  = send FTM range request
  driver_flags  = show supported driver flags
  dpp_qr_code report a scanned DPP URI from a QR Code
  dpp_bootstrap_gen type=<qrcode> [chan=..] [mac=..] [info=..] [curve=..] [key=..] = generate DPP bootstrap information
  dpp_bootstrap_remove *|<id> = remove DPP bootstrap information
  dpp_bootstrap_get_uri <id> = get DPP bootstrap URI
  dpp_bootstrap_info <id> = show DPP bootstrap information
  dpp_bootstrap_set <id> [conf=..] [ssid=<SSID>] [ssid_charset=#] [psk=<PSK>] [pass=<passphrase>] [configurator=<id>] [conn_status=#] [akm_use_selector=<0|1>] [group_id=..] [expiry=#] [csrattrs=..] = set DPP configurator parameters
  dpp_auth_init peer=<id> [own=<id>] = initiate DPP bootstrapping
  dpp_listen <freq in MHz> = start DPP listen
  dpp_stop_listen = stop DPP listen
  dpp_configurator_add [curve=..] [key=..] = add DPP configurator
  dpp_configurator_remove *|<id> = remove DPP configurator
  dpp_configurator_get_key <id> = Get DPP configurator's private key
  dpp_configurator_sign conf=<role> configurator=<id> = generate self DPP configuration
  dpp_pkex_add add PKEX code
  dpp_pkex_remove *|<id> = remove DPP pkex information
  dpp_controller_start [tcp_port=<port>] [role=..] = start DPP controller
  dpp_controller_stop = stop DPP controller
  dpp_chirp own=<BI ID> iter=<count> = start DPP chirp
  dpp_stop_chirp = stop DPP chirp
  accept_acl =Add/Delete/Show/Clear accept MAC ACL
  deny_acl =Add/Delete/Show/Clear deny MAC ACL
  poll_sta <addr> = poll a STA to check connectivity with a QoS null frame
  req_beacon <addr> [req_mode=] <measurement request hexdump>  = send a Beacon report request to a station
  reload_wpa_psk = reload wpa_psk_file only