john

root@kali:~# man SIPdump
SIPDUMP(1)                  General Commands Manual                  SIPDUMP(1)

NAME
     sipdump - Part of SIPcrack, A suite of tools to sniff and crack the digest
     authentications within the SIP protocol.

SYNOPSIS
     sipdump [options] <dump_file>

DESCRIPTION
     This manual page documents briefly the sipdump tool

     Session Initiation Protocol (SIP) is a protocol developed by the IETF MMU-
     SIC  Working  Group  and is a proposed standard for initiating, modifying,
     and terminating an interactive user session that involves multimedia  ele-
     ments  such  as video, voice, instant messaging, online games, and virtual
     reality.

     In November 2000, SIP was accepted as a 3GPP signaling protocol and perma-
     nent element of the IMS architecture.  It is one of the leading signalling
     protocols for Voice over IP, along with H.323. In most VOIP solutions  SIP
     is  used to authenticate the SIPclient.  The protocol is documented inside
     the RFC at www.ietf.org/rfc/rfc3261.txt

     SIPcrack is a SIP login sniffer/cracker that contains 2 programs:  sipdump
     to  capture  the digest authentication and sipcrack to bruteforce the hash
     using a wordlist or standard input.
     sipdump dumps SIP digest authentications. If a login is found, the sniffed
     login is written to the dump file.  See 'sipdump -h' for options.
     sipcrack bruteforces the user's password with the dump file  generated  by
     sipdump. If a password is found, the sniffed and cracked login will be up-
     dated in the dump file.
     See 'sipcrack -h' for options.

OPTIONS
     A summary of options is included below.

     -i interface,
            interface to listen on

     -p pcap_file,
            use pcap data file

     -m,    enter login data manually

     -f libpcap_filer ,
            set libpcap filter

EXAMPLE
     sipdump -i eth0 logins.dump
     sipcrack -w mywordlist.txt logins.dump

SEE ALSO
     sipcrack(1).

AUTHOR
     sipdump was written by Martin J. Muench <mjm@codito.de>

     This  manual  page  was  written  by  Sebastian  Castillo  Builes <castil-
     lobuiles@gmail.com>, for the Debian project (but may be used by others).

                                 April 29, 2008                      SIPDUMP(1)

root@kali:~# base64conv -h
base64conv: invalid option -- 'h'
Usage: base64conv [-l] [-i intype] [-o outtype] [-q] [-w] [-e] [-f flag] [data[data ...] | < stdin]
 - data must match input_type i.e. if hex, then data should be in hex
 - if data is not present, then base64conv will read data from std input)
 - if data read from stdin, max size of any line is 256k

  -q will only output resultant string. No extra junk text
  -e turns on buffer overwrite error checking logic
  -l performs a 'length' test

  -r ifname  process whole file ifname (this is the input file)
  -w ofname  The output filename for whole file processing
             NOTE, -r and -w have to be used as a pair

Input/Output types:
  raw      raw data byte
  hex      hexadecimal string (for input, case does not matter)
  mime     base64 mime encoding
  crypt    base64 crypt character set encoding
  cryptBS  base64 crypt encoding, byte swapped

Flags (note more than 1 -f command switch can be given at one time):
  HEX_UPCASE         output or length UPCASED (input case auto handled)
  HEX_LOCASE         output or length locased (input case auto handled)
  MIME_TRAIL_EQ      output mime adds = chars (input = auto handled)
  CRYPT_TRAIL_DOTS   output crypt adds . chars (input . auto handled)
  MIME_PLUS_TO_DOT   mime converts + to . (passlib encoding)
  MIME_DASH_UNDER    mime convert +/ into -_ (passlib encoding)

root@kali:~# bitlocker2john -h

Usage: bitlocker2john -i <Image of encrypted memory unit>

Options:

  -h		Show this help
  -i		Image path of encrypted memory unit encrypted with BitLocker

root@kali:~# calc_stat -h
Usage: calc_stat [-p] dictionary_file statfile
	-p: include non printable and 8-bit characters

root@kali:~# cprepair -h
Codepage repair (c) magnum 2014-2019

Input can be a mix of codepages, UTF-8 and double-encoded UTF-8, and with
a mix of Windows (CRLF) and Unix (LF) line endings, or missing line endings
on last lines.  If no file name is given, STDIN is used.
Output is UTF-8 with LF line endings and no silly BOM.

Usage: cprepair [options] [file(s)]
Options:
 -i <cp>   Codepage to assume for 8-bit input. Default is CP1252 (MS Latin-1)
 -f <cp>   Alternate codepage when no ASCII letters (a-z, A-Z) seen (default
           is to not treat them differently)
 -n        Do not guess (leave 8-bit as-is)
 -s        Suppress lines that does not need fixing.
 -d        Debug (show conversions).
 -l        List supported encodings.
 -p        Only convert stuff after first ':' (.pot file).
 -P        Suppress output lines with unprintable ASCII and, when used together
           with -n option, also suppress lines with invalid UTF-8

root@kali:~# eapmd5tojohn -h
Usage: eapmd5tojohn -r <pcap file>

root@kali:~# genmkvpwd -h
Usage: genmkvpwd statfile max_lvl [max_len] [start] [end]

root@kali:~# john -h
John the Ripper 1.9.0-jumbo-1+bleeding-aec1328d6c 2021-11-02 10:45:52 +0100 OMP [linux-gnu 64-bit x86_64 SSE2 AC]
Copyright (c) 1996-2021 by Solar Designer and others
Homepage: https://www.openwall.com/john/

Usage: john [OPTIONS] [PASSWORD-FILES]

--help                     Print usage summary
--single[=SECTION[,..]]    "Single crack" mode, using default or named rules
--single=:rule[,..]        Same, using "immediate" rule(s)
--single-seed=WORD[,WORD]  Add static seed word(s) for all salts in single mode
--single-wordlist=FILE     *Short* wordlist with static seed words/morphemes
--single-user-seed=FILE    Wordlist with seeds per username (user:password[s]
                           format)
--single-pair-max=N        Override max. number of word pairs generated (6)
--no-single-pair           Disable single word pair generation
--[no-]single-retest-guess Override config for SingleRetestGuess
--wordlist[=FILE] --stdin  Wordlist mode, read words from FILE or stdin
                  --pipe   like --stdin, but bulk reads, and allows rules
--rules[=SECTION[,..]]     Enable word mangling rules (for wordlist or PRINCE
                           modes), using default or named rules
--rules=:rule[;..]]        Same, using "immediate" rule(s)
--rules-stack=SECTION[,..] Stacked rules, applied after regular rules or to
                           modes that otherwise don't support rules
--rules-stack=:rule[;..]   Same, using "immediate" rule(s)
--rules-skip-nop           Skip any NOP ":" rules (you already ran w/o rules)
--loopback[=FILE]          Like --wordlist, but extract words from a .pot file
--mem-file-size=SIZE       Size threshold for wordlist preload (default 2048 MB)
--dupe-suppression         Suppress all dupes in wordlist (and force preload)
--incremental[=MODE]       "Incremental" mode [using section MODE]
--incremental-charcount=N  Override CharCount for incremental mode
--external=MODE            External mode or word filter
--mask[=MASK]              Mask mode using MASK (or default from john.conf)
--markov[=OPTIONS]         "Markov" mode (see doc/MARKOV)
--mkv-stats=FILE           "Markov" stats file
--prince[=FILE]            PRINCE mode, read words from FILE
--prince-loopback[=FILE]   Fetch words from a .pot file
--prince-elem-cnt-min=N    Minimum number of elements per chain (1)
--prince-elem-cnt-max=[-]N Maximum number of elements per chain (negative N is
                           relative to word length) (8)
--prince-skip=N            Initial skip
--prince-limit=N           Limit number of candidates generated
--prince-wl-dist-len       Calculate length distribution from wordlist
--prince-wl-max=N          Load only N words from input wordlist
--prince-case-permute      Permute case of first letter
--prince-mmap              Memory-map infile (not available with case permute)
--prince-keyspace          Just show total keyspace that would be produced
                           (disregarding skip and limit)
--subsets[=CHARSET]        "Subsets" mode (see doc/SUBSETS)
--subsets-required=N       The N first characters of "subsets" charset are
                           the "required set"
--subsets-min-diff=N       Minimum unique characters in subset
--subsets-max-diff=[-]N    Maximum unique characters in subset (negative N is
                           relative to word length)
--subsets-prefer-short     Prefer shorter candidates over smaller subsets
--subsets-prefer-small     Prefer smaller subsets over shorter candidates
--make-charset=FILE        Make a charset, FILE will be overwritten
--stdout[=LENGTH]          Just output candidate passwords [cut at LENGTH]
--session=NAME             Give a new session the NAME
--status[=NAME]            Print status of a session [called NAME]
--restore[=NAME]           Restore an interrupted session [called NAME]
--[no-]crack-status        Emit a status line whenever a password is cracked
--progress-every=N         Emit a status line every N seconds
--show[=left]              Show cracked passwords [if =left, then uncracked]
--show=formats             Show information about hashes in a file (JSON)
--show=invalid             Show lines that are not valid for selected format(s)
--test[=TIME]              Run tests and benchmarks for TIME seconds each
                           (if TIME is explicitly 0, test w/o benchmark)
--stress-test[=TIME]       Loop self tests forever
--test-full=LEVEL          Run more thorough self-tests
--no-mask                  Used with --test for alternate benchmark w/o mask
--skip-self-tests          Skip self tests
--users=[-]LOGIN|UID[,..]  [Do not] load this (these) user(s) only
--groups=[-]GID[,..]       Load users [not] of this (these) group(s) only
--shells=[-]SHELL[,..]     Load users with[out] this (these) shell(s) only
--salts=[-]COUNT[:MAX]     Load salts with[out] COUNT [to MAX] hashes, or
--salts=#M[-N]             Load M [to N] most populated salts
--costs=[-]C[:M][,...]     Load salts with[out] cost value Cn [to Mn]. For
                           tunable cost parameters, see doc/OPTIONS
--fork=N                   Fork N processes
--node=MIN[-MAX]/TOTAL     This node's number range out of TOTAL count
--save-memory=LEVEL        Enable memory saving, at LEVEL 1..3
--log-stderr               Log to screen instead of file
--verbosity=N              Change verbosity (1-5 or 6 for debug, default 3)
--no-log                   Disables creation and writing to john.log file
--bare-always-valid=Y      Treat bare hashes as valid (Y/N)
--catch-up=NAME            Catch up with existing (paused) session NAME
--config=FILE              Use FILE instead of john.conf or john.ini
--encoding=NAME            Input encoding (eg. UTF-8, ISO-8859-1). See also
                           doc/ENCODINGS.
--input-encoding=NAME      Input encoding (alias for --encoding)
--internal-codepage=NAME   Codepage used in rules/masks (see doc/ENCODINGS)
--target-encoding=NAME     Output encoding (used by format)
--force-tty                Set up terminal for reading keystrokes even if we're
                           not the foreground process
--field-separator-char=C   Use 'C' instead of the ':' in input and pot files
--[no-]keep-guessing       Try finding plaintext collisions
--list=WHAT                List capabilities, see --list=help or doc/OPTIONS
--length=N                 Shortcut for --min-len=N --max-len=N
--min-length=N             Request a minimum candidate length in bytes
--max-length=N             Request a maximum candidate length in bytes
--max-candidates=[-]N      Gracefully exit after this many candidates tried.
                           (if negative, reset count on each crack)
--max-run-time=[-]N        Gracefully exit after this many seconds (if negative,
                           reset timer on each crack)
--mkpc=N                   Request a lower max. keys per crypt
--no-loader-dupecheck      Disable the dupe checking when loading hashes
--pot=NAME                 Pot file to use
--regen-lost-salts=N       Brute force unknown salts (see doc/OPTIONS)
--reject-printable         Reject printable binaries
--tune=HOW                 Tuning options (auto/report/N)
--subformat=FORMAT         Pick a benchmark format for --format=crypt
--format=[NAME|CLASS][,..] Force hash of type NAME. The supported formats can
                           be seen with --list=formats and --list=subformats.
                           See also doc/OPTIONS for more advanced selection of
                           format(s), including using classes and wildcards.

root@kali:~# keepass2john -h
keepass2john: invalid option -- 'h'
Usage: keepass2john [-k <keyfile>] <.kdbx database(s)>

root@kali:~# man mailer
MAILER(8)                   System Manager's Manual                   MAILER(8)

NAME
     mailer - script to warn users about their weak passwords

SYNOPSIS
     mailer password-files

DESCRIPTION
     This  manual  page  documents briefly the mailer command, which is part of
     the john package.  This manual page was written for the  Debian  GNU/Linux
     distribution  because  the  original  program does not have a manual page.
     john, better known as John the Ripper, is a tool to find weak passwords of
     users in a server.
     The mailer tool is useful to inform users which have been found to be  us-
     ing weak passwords by mail.

     You should edit the message mailer will send to the users, but remember to
     copy the script to a safe place before editing it, as it's generally a bad
     idea to modify things living in /usr.

SEE ALSO
     john(8), unafs(8), unique(8), unshadow(8).

     The programs are documented fully by John's documentation, which should be
     available in /usr/share/doc/john or other location, depending on your sys-
     tem.

AUTHOR
     This  manual page was written by Jordi Mallach <jordi@debian.org>, for the
     Debian GNU/Linux system (but may be used by others).
     John the Ripper and mailer were written  by  Solar  Designer  <solar@open-
     wall.com>.  The  complete list of contributors can be found in the CREDITS
     file in the documentation directory.

john                             June 03, 2004                        MAILER(8)

root@kali:~# rar2john -h
rar2john: invalid option -- 'h'
Usage: rar2john [-v] <rar file(s)>
 -v	Add some verbosity/debug output

root@kali:~# tgtsnarf --help
tgtsnarf: invalid option -- '-'
Usage: tgtsnarf [-A] realm host [users...]

root@kali:~# unafs -h
Usage: unafs DATABASE-FILE CELL-NAME

root@kali:~# man unique
UNIQUE(8)                   System Manager's Manual                   UNIQUE(8)

NAME
     unique - removes duplicates from a wordlist

SYNOPSIS
     unique output-file

DESCRIPTION
     This  manual  page  documents briefly the unique command, which is part of
     the john package.  This manual page was written for the  Debian  GNU/Linux
     distribution  because  the  original  program does not have a manual page.
     john, better known as John the Ripper, is a tool to find weak passwords of
     users in a server.
     The unique tool finds and removes duplicate entries from a wordlist  (read
     from stdin), without changing the order. This is important to increase the
     performance of john when using the wordlist method.

SEE ALSO
     john(8), mailer(8), unafs(8), unshadow(8).

     The programs are documented fully by John's documentation, which should be
     available in /usr/share/doc/john or other location, depending on your sys-
     tem.

AUTHOR
     This  manual page was written by Jordi Mallach <jordi@debian.org>, for the
     Debian GNU/Linux system (but may be used by others).
     John the Ripper and mailer were written  by  Solar  Designer  <solar@open-
     wall.com>.  The  complete list of contributors can be found in the CREDITS
     file in the documentation directory.

john                             June 03, 2004                        UNIQUE(8)

root@kali:~# unshadow -h
Usage: unshadow PASSWORD-FILE SHADOW-FILE

root@kali:~# wpapcap2john -h
Converts PCAP or IVS2 files to JtR format.
Supported encapsulations: 802.11, Prism, Radiotap, PPI and TZSP over UDP.
Usage: wpapcap2john [options] <file[s]>

-c		Show only complete auths (incomplete ones might be wrong passwords
		but we can crack what passwords were tried).
-v		Bump verbosity (can be used several times, try -vv)
-d		Do not suppress dupe hashes (per AP/STA pair)
-r		Ignore replay-count (may output fuzzed-anonce handshakes)
-f <n>		Force anonce fuzzing with +/- <n>
-e <essid:mac>	Manually add Name:MAC pair(s) in case the file lacks beacons.
		eg. -e "Magnum WIFI:6d:61:67:6e:75:6d"
-m <mac>	Ignore any packets not involving this mac address

root@kali:~# zip2john -h
zip2john: invalid option -- 'h'
Usage: zip2john [options] [zip file(s)]
 -s Scan archive from the beginning, looking for local file headers. This
    is less reliable than going by the central index, but might work better
    with corrupted or split archives.
Options for 'old' PKZIP encrypted files only:
 -a <filename>   This is a 'known' ASCII file. This can be faster, IF all
    files are larger, and you KNOW that at least one of them starts out as
    'pure' ASCII data.
 -o <filename>   Only use this file from the .zip file.
 -c This will create a 'checksum only' hash.  If there are many encrypted
    files in the .zip file, then this may be an option, and there will be
    enough data that false positives will not be seen.  Up to 8 files are
    supported. These hashes do not reveal actual file data.
 -m Use "file magic" as known-plain if applicable. This can be faster but
    not 100% safe in all situations.

NOTE: By default it is assumed that all files in each archive have the same
password. If that's not the case, the produced hash may be uncrackable.
To avoid this, use -o option to pick a file at a time.

root@kali:~# aix2john -h
usage: aix2john [-h] [-s] [-f FILENAME]

options:
  -h, --help   show this help message and exit
  -s           Use this option if "lpa_options = std_hash=true" is activated
  -f FILENAME  Specify the AIX shadow file filename to read (usually
               /etc/security/passwd)

root@kali:~# androidfde2john -h
Usage: /usr/bin/androidfde2john <data partition / image> <footer partition / image>

root@kali:~# bks2john -h
Usage: bks2john [options] <.bks / .uber file(s)>

Options:
  -h, --help            show this help message and exit
  -t TYPE, --type=TYPE  BKS keystore type (bks / uber)

root@kali:~# blockchain2john -h
usage: /usr/bin/blockchain2john [blockchain wallet files]

options:
  -h, --help  show this help message and exit
  --json      is the wallet using v2 format?
  --base64    does the wallet contain only a base64 string?

root@kali:~# cisco2john -h
Usage:	/usr/bin/cisco2john [cisco config file(s)] >>hashfile 2>>seed.txt
	/usr/bin/cisco2john/john -format:md5 -wordlist:seed.txt -rules hashfile

root@kali:~# deepsound2john -h
usage: deepsound2john [-h] [--verbose] file [file ...]

positional arguments:
  file

options:
  -h, --help     show this help message and exit
  --verbose, -v

root@kali:~# electrum2john -h
Usage: electrum2john [options]

Options:
  -h, --help  show this help message and exit
  -t          force generation of truncated hashes

root@kali:~# hccapx2john -h
usage: hccapx2john [-h] [-nc NC] [--no-mp] hccapx

hccapx2john, process hccapx file into a format suitable for use with JtR

positional arguments:
  hccapx      hccapx file to process

options:
  -h, --help  show this help message and exit
  -nc NC      AP nonce correction to be used, 0 to disable, default 8
  --no-mp     disable message_pair BE/LE/nc detection

root@kali:~# keyring2john -h
usage: keyring2john [-h] KEYRING_FILE

keyring2john.py -> convert Gnome Keyring files to john format.

positional arguments:
  KEYRING_FILE  Input Gnome Keyring file

options:
  -h, --help    show this help message and exit

root@kali:~# keystore2john -h
Traceback (most recent call last):
  File "/usr/bin/keystore2john", line 80, in process_file
    fd = open(filename, "rb")
FileNotFoundError: [Errno 2] No such file or directory: '-h'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/bin/keystore2john", line 187, in <module>
    process_file(sys.argv[i])
    ~~~~~~~~~~~~^^^^^^^^^^^^^
  File "/usr/bin/keystore2john", line 83, in process_file
    sys.stderr.write("! %s: %s\n" % filename, str(e))
                     ~~~~~~~~~~~~~^~~~~~~~~~
TypeError: not enough arguments for format string

root@kali:~# kirbi2john -h
usage: kirbi2john [-h] [-o [crack_file]] file.kirbi [file.kirbi ...]

Read Mimikatz kerberos ticket then modify it and save it in crack_file

positional arguments:
  file.kirbi       File name to crack. Use asterisk '*' for many files. Files
                   are exported with mimikatz or from extracttgsrepfrompcap.py

options:
  -h, --help       show this help message and exit
  -o [crack_file]  File to save crackable output to (default is stdout

root@kali:~# mac2john -h
-h : [Errno 2] No such file or directory: '-h'

root@kali:~# mosquitto2john -h
usage: mosquitto2john [-h] [-hc] [passwd_file ...]

positional arguments:
  passwd_file     Path to the source mosquitto_passwd file(s).

options:
  -h, --help      show this help message and exit
  -hc, --hashcat  Convert hashes to hashcat friendly formats.

Find more Information:
    See doc/README-mosquitto.md for info/troubleshooting.

root@kali:~# openssl2john -h
Usage: openssl2john [options]

Options:
  -h, --help    show this help message and exit
  -p PLAINTEXT  
  -a MINASCII   
  -c CIPHER     
  -m MD

root@kali:~# pdf2john --help
Syntax:  pdf2john.pl <.pdf file(s)>

root@kali:~# ps_token2john -h
Based on tokenchpoken v0.5 beta's parse.py file
Oracle PS_TOKEN cracker. Token parser

Alexey Tyurin - a.tyurin at erpscan.io
ERPScan Research Group - https://www.erpscan.io

usage: ps_token2john [-h] -c COOKIE

options:
  -h, --help  show this help message and exit
  -c COOKIE   Set a victim's PS_TOKEN cookie for parsing

root@kali:~# ssh2john -h
[Errno 2] No such file or directory: '-h'

root@kali:~# sspr2john -h
usage: sspr2john [-h] -H HOST [-p PORT] -b BASEDN [-s] [-D BINDDN]
                 [-w PASSWORD]

Utility to retrieve NetIQ SSPR hashes from a LDAP server.

options:
  -h, --help            show this help message and exit
  -H, --host HOST       Format like ad.example.net or 192.168.124.10
  -p, --port PORT       Format like 389 or 636
  -b, --basedn BASEDN   Format like CN=Users,DC=EXAMPLE,DC=NET
  -s, --secure          Use LDAPS (LDAP OVER SSL), recommended
  -D, --binddn BINDDN   Format like CN=<username>,CN=Users,DC=EXAMPLE,DC=NET
                        or <username>
  -w, --password PASSWORD
                        Password for LDAP bind

root@kali:~# tezos2john -h
usage: tezos2john [-h] [-i] [-I]

Creates Tezos File For John The Ripper

options:
  -h, --help            show this help message and exit
  -i, --ignoreRules, --ignorerules
                        Ignore All Rules, seed words, checksum, ...
  -I, --ignoreICORules, --ignoreicorules
                        Do Not Check To See If It Is A Valid ICO Format (15
                        seed words)

root@kali:~# truecrypt2john -h
Usage: truecrypt2john [options]

Options:
  -h, --help  show this help message and exit
  -b