root@kali:~# atk6-address6 -h atk6-address6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-address6 mac-address [ipv6-prefix] atk6-address6 ipv4-address [ipv6-prefix] atk6-address6 ipv6-address Converts a mac or IPv4 address to an IPv6 address (link local if no prefix is given as 2nd option) or, when given an IPv6 address, prints the mac or IPv4 address. Prints all possible variations. Returns -1 on errors or the number of variations found
root@kali:~# atk6-alive6 -h atk6-alive6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-alive6 [-CFHLMPSdlpvV] [-I srcip6] [-i file] [-o file] [-e opt] [-s port,..] [-a port,..] [-u port,..] [-T tag] [-W TIME] interface [unicast-or-multicast-address [remote-router]] Options: Output Options: -i file check systems from input file -o file write results to output file -v verbose information (twice: detailed, thrice: dumping packets) -d DNS resolve alive IPv6 addresses Enumerate Options: -M enumerate hardware addresses (MAC) from input addresses (slow!) -C enumerate common addresses of input networks, -CC for large scan -4 ipv4/range test various IPv4 address encodings per network (eg 1.2.3.4/24) Alive Technique Options: -p send a ping packet for alive check (default) -e dst,hop send an errornous packets: destination (default), hop-by-hop -s port,port,.. TCP-SYN packet to ports for alive check or "portscan" -a port,port,.. TCP-ACK packet to ports for alive check -u port,port,.. UDP packet to ports for alive check -F firewall mode: -p -e dst -u 53 -s 22,25,80,443,9511 -a 9511 Sending Options -n number how often to send each packet (default: local 1, remote 2) -W time time in ms to wait after sending a packet (default: 1) -S slow mode, get best router for each remote target or when proxy-NA -I src[/mask] use the specified IPv6 address as source. Use mask for random. -l use link-local address for multicast addresses instead of global -P only print addresses that would be scanned, no packets are sent! -m raw mode (for network adapters where you do not have Ethernet) Help Options: -hh show even more options Target address on command line or in input file can include ranges in the form of 2001:db8::1-fff or 2001:db8::1-2:0-ffff:0:0-ffff, etc. Do not use the ranges (from-to) option with -M, -C or -4. If you use SYN packets (-s/-F option), automatic OS detection is performed. Returns -1 on errors, 0 if a system was found alive or 1 if nothing was found.
root@kali:~# atk6-connect6 -h connect6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-connect6 [-a | -A type] [-i] target-ip target-port Options: -a send Hop-by-Hop Router Alert option -A type like -a but lets you define the alarmtype (number) -i interactive mode (like telnet) -I end a linefeed, wait for a string, print it -O try TCP Fast Open connection -w ms wait time for connect in ms (default: 1000) -p ping mode You can supply a %interface identifier to the target-ip Returns 0 on successful connect, 1 on timeout/reset
root@kali:~# atk6-connsplit6 -h splitconnect6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: [-vd] atk6-connsplit6 INTERFACE client|server Options: -v verbose mode -d debug mode Manipulates all incoming (client) or outgoing (server) TCP connections that are from (server) or to (client) port 64446, and sets a new destinatin (server) or source (client) address. The purpose of this is a proof of concept to make connect analysis difficult. It is recommended to use the splitconnect6.sh script to control this tool.
root@kali:~# atk6-covert_send6 -h atk6-covert_send6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-covert_send6 [-m mtu] [-k key] [-s resend] interface target file [port] Options: -m mtu specifies the maximum MTU (default: interface MTU, min: 1000) -k key encrypt the content with Blowfish-160 -s resend send each packet RESEND number of times, default: 1 Sends the content of FILE covertly to the target, And its POC - don't except too much sophistication - its just put into the destination header.
root@kali:~# atk6-covert_send6d -h atk6-covert_send6d 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-covert_send6d [-k key] interface file Options: -k key decrypt the content with Blowfish-160 Writes covertly received content to FILE.
root@kali:~# atk6-denial6 -h atk6-denial6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-denial6 interface destination test-case-number Performs various denial of service attacks on a target If a system is vulnerable, it can crash or be under heavy load, so be careful! The following test cases are currently implemented: 1 : large hop-by-hop header with router-alert and filled with unknown options 2 : large destination header filled with unknown options 3 : hop-by-hop header with router alert option plus 180 headers 4 : hop-by-hop header with router alert option plus 178 headers + ping 5 : AH header + ping 6 : first fragments of a ping with a hop-by-hop header with router alert 7 : large hop-by-hop header filled with unknown options (no router alert)
root@kali:~# atk6-detect-new-ip6 -h atk6-detect-new-ip6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-detect-new-ip6 interface [script] This tools detects new IPv6 addresses joining the local network. If script is supplied, it is executed with the detected IPv6 address as first and the interface as second command line option.
root@kali:~# atk6-detect_sniffer6 -h atk6-detect_sniffer6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-detect_sniffer6 interface [target6] Tests if systems on the local LAN are sniffing. Works against Windows, Linux, OS/X and *BSD If no target is given, the link-local-all-nodes address is used, which however not always works.
root@kali:~# atk6-dnsdict6 -h
atk6-dnsdict6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6
Syntax: atk6-dnsdict6 [-d4] [-s|-m|-l|-x|-u] [-t THREADS] [-D] domain [dictionary-file]
Enumerates a domain for DNS entries, it uses a dictionary file if supplied
or a built-in list otherwise. This tool is based on dnsmap by gnucitizen.org.
Options:
-4 do also dump IPv4 addresses
-t NO specify the number of threads to use (default: 8, max: 32).
-D dump the selected built-in wordlist, no scanning.
-d display IPv6 information on NS and MX DNS domain information.
-e ignore no NS for domain errors
-S perform SRV service name guessing
-[smlxu] choose the dictionary size by -s(mall=100), -m(edium=1419) (DEFAULT)
-l(arge=2601), -x(treme=5886) or -u(ber=16724)
root@kali:~# atk6-dnsrevenum6 -h atk6-dnsrevenum6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-dnsrevenum6 [-t] dns-server ipv6address Performs a fast reverse DNS enumeration and is able to cope with slow servers. Option -t enables TCP instead of UDP (use this if you get many timeouts) Examples: atk6-dnsrevenum6 dns.test.com 2001:db8:42a8::/48 atk6-dnsrevenum6 -t dns.test.com 8.a.2.4.8.b.d.0.1.0.0.2.ip6.arpa
root@kali:~# atk6-dnssecwalk -h atk6-dnssecwalk 3.8 (c) 2020 by Marc Heuse <mh@mh-sec.de> http://www.mh-sec.de Syntax: atk6-dnssecwalk [-e46t] dns-server domain Options: -e ensure that the domain is present in found addresses, quit otherwise -4 resolve found entries to IPv4 addresses -6 resolve found entries to IPv6 addresses -t use TCP instead of UDP Perform DNSSEC NSEC walking. Example: atk6-dnssecwalk dns.test.com test.com
root@kali:~# atk6-dos-new-ip6 -h atk6-dos-new-ip6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-dos-new-ip6 [-S] interface This tools prevents new IPv6 interfaces to come up, by sending answers to duplicate ip6 checks (DAD). This results in a DOS for new IPv6 devices. Option -S sends conflicting NS query instead of NA reply, but it restricts source randomization.
root@kali:~# atk6-dump_dhcp6 -h atk6-dump_dhcp6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-dump_dhcp6 [-V vendorid] interface [target] Options: -V vendorid send vendorid number,string (e.g. 11,test) -N use fe80:: as source -n use empty mac as source DHCPv6 information tool. Dumps the available servers and their setup. You can specify a specific DHCPv6 server as destination.
root@kali:~# atk6-dump_router6 -h atk6-dump_router6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-dump_router6 interface [target] Dumps all local routers and their information
root@kali:~# atk6-exploit6 -h atk6-exploit6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-exploit6 interface destination [test-case-number] Performs exploits of various CVE known IPv6 vulnerabilities on the destination Note that for exploitable overflows only 'AAA...' strings are used. If a system is vulnerable, it will crash, so be careful!
root@kali:~# man atk6-extract_hosts6
THC-IPv6(8) System Manager's Manual THC-IPv6(8)
NAME
The Hacker Choice's IPv6 Attack Toolkit (aka thc-ipv6)
SYNOPSIS
tool [options] ...
DESCRIPTION
This manual page briefly documents each of the attack-toolkit6
tools. Not all options are listed here, to see the full list of op-
tions of each tool please invoke them with -h.
Note that on Debian (if you read this on Debian) command names are
prefixed with atk6- , so for example the tool alive6 should be in-
voked as atk6-alive6. This is a Debian-only modification.
address6 <mac-address/ipv4-address/ipv6-address> [ipv6-prefix]
Converts a mac or ipv4 address to an ipv6 address (link local if no
prefix is given as 2nd option) or, when given an ipv6 address,
prints the mac or ipv4 address. Prints all possible variations. Re-
turns -1 on errors or the number of variations found.
alive6 <interface> [unicast-or-multicast-address [remote-router]]
Shows alive addresses in the segment. If you specify a remote
router, the packets are sent with a routing header prefixed by
fragmentation.
covert_send6 <interface> <target> <file> [port]
Sends the content of FILE covertly to the target.
covert_send6d <interface> <file>
Writes received covertly content to FILE.
denial6 <interface> <destination> <test-case-number>
Performs various denial of service attacks on a target.
detect_sniffer6 <interface> [target-ip]
Tests if systems on the local LAN are sniffing. Works against Win-
dows, Linux, OS/X and *BSD systems.
dnssecwalk [-e46] <dns-server> <domain>
Performs DNSSEC NSEC walking.
dos_mld <interface>
This tools prevents new ipv6 interfaces to come up, by sending an-
swers to duplicate ip6 checks (DAD). This results in a DOS for new
ipv6 devices.
dos-new-ip6 <interface>
This tools prevents new ipv6 interfaces to come up, by sending an-
swers to duplicate ip6 checks (DAD). This results in a DOS for new
ipv6 devices.
detect-new-ip6 <interface> [scriptname]
This tools detects new ipv6 addresses joining the local network.
If scriptname is supplied, it is executed with the detected IPv6
address as option.
dnsdict6 [-t THREADS] <domain> [dictionary-file]
Enumerates a domain for DNS entries, it uses a dictionary file if
supplied or a built-in list otherwise.
dnsrevenum6 <dns-server> <ipv6-address>
Performs a fast reverse DNS enumeration.
dump_router6 <interface>
Dumps all local routers and their information.
dump_dhcp6 <interface>
Dumps all DHCPv6 servers and their information
exploit6 <interface> <destination> [test-case-number]
Performs exploits of various CVE known IPv6 vulnerabilities on the
destination.
extract_hosts6 <file>
Prints the host parts of ipv6 addresses in file.
extract_networks6 <interface>
Prints the networks found in file.
fake_advertise6 <interface> <ip-address> [target-address [own-mac-ad-
dress]]
Advertise ipv6 address on the network (with own mac if not defined)
sending it to the all-nodes multicast address if no target speci-
fied.
fake_dhcps6 <interface> <network-address/prefix-length> <dns-server>
Fake DHCPv6 server. Used to configure an address and set a DNS
server.
fake_dns6d <interface> <ipv6-address>
Fake DNS server that serves the same IPv6 address to any lookup re-
quest.
fake_dnsupdate6 <dns-server> <fqdn> <ipv6-address>
Send false DNS update requests.
fake_mipv6 <interface> <home-address> <home-agent-address> <care-of-ad-
dress>
If the mobile IPv6 home-agent is mis-configured to accept MIPV6 up-
dates without IPSEC, this will redirect all packets for home-ad-
dress to care-of-address.
fake_mld6 <interface> <multicast-address> [[target-address] [[ttl] [[own-
ip] [own-mac-address]]]]
Advertise yourself in a multicast group of your choice.
fake_mld26 [-l] <interface> <add|delete|query> [multicast-address [target-
address [ttl [own-ip [own-mac-address [destination-mac-address]]]]]]
This uses the MLDv2 protocol. Only a subset of what the protocol is
able to do is possible to implement via a command line.
fake_mldrouter6 [-l] <interface> <advertise|solicitate|terminate> [own-ip
[own-mac-address]]
Announce, delete or solicitate MLD router - yourself or others.
fake_pim6 [-t ttl] [-s src6] [-d dst6] <interface> {<hello> [dr_prior-
ity]|{join|prune} <neighbor6> <multicast6> <target6>}
The hello command takes optionally the DR priority (default: 0).
fake_router6 <interface> <router-ip-link-local
network-address/prefix-length> <mtu> [mac-address] Announce your-
self as a router and try to become the default router. If a non-
existing mac-address is supplied, this results in a DOS.
fake_router26 <interface>
Like fake_router6 with more options available.
fake_solicitate6 <interface> <solicited-ip>
Solicits IPv6 address on the network, sending it to the all-nodes
multicast address.
firewall6 [-u] <interface> <destination> <port> [test-case-no]
Performs various ACL bypass attempts to check implementations. De-
faults to TCP ports, option -u switches to UDP. For all test cases
to work, ICMPv6 ping to the destination must be allowed.
flood_advertise6 <interface>
Flood the local network with neighbor advertisements.
flood_dhcpc6 <interface> [domain-name]
DHCP client flooder. Use to deplete the IP address pool a DHCP6
server is offering. Note: if the pool is very large, this is rather
senseless.
flood_mld6 <interface>
Flood the local network with MLD reports.
flood_mld26 <interface>
Flood the local network with MLDv2 reports.
flood_mldrouter6 <interface>
Flood the local network with MLD router advertisements.
flood_redir6 [-HFD] interface [target] [oldrouter [newrouter]]
Flood a target with ICMPv6 redirects
flood_router6 <interface>
Flood the local network with router advertisements.
flood_router26 <interface>
Similar to flood_router6 but with more options available.
flood_rs6 [-sS] interface [target]
Flood a network with ICMPv6 router solicitation messages
flood_solicitate6 <interface> [target-ip]
Flood the network with neighbor solicitations.
four2six [-FHD] [-s src6] interface ipv6-to-ipv4-gateway ipv4-src ipv4-dst
[port]
Send (spoofed) packets over a 4to6 tunnel (IPv4 packets over IPv6
networks)
fragmentation6 <interface> <target-ip>
Performs fragment firewall and implementation checks, including de-
nial-of-service.
fuzz_ip6 [-x] [-t number | -T number] [-p number] [-IFSDHRJ]
[-1|-2|-3|-4|-5|-6|-7] <interface> <unicast-or-multicast-address> [ad-
dress-in-data-pkt]
Fuzzes an icmp6 packet.
fuzz_dhcpc6 [-1|-2|-3|-4|-5|-6|-7|-8|-9|-A|-B|-C|-D|-m] [-f mac] [-l link]
[-v ipv6] [-x xid] [-c client] [-o options] interface
Fuzzes messages sent to a DHCPv6 client.
fuzz_dhcps6 [-t number | -T number] [-e number | -T number] [-p number]
[-md] [-1|-2|-3|-4|-5|-6|-7|-8] interface [domain-name]
Fuzzes a DHCPv6 server on specified packet types. implementation6
<interface> <destination> [test-case-number] Performs some ipv6 im-
plementation checks, can be used to test firewalls too.
implementation6d <interface>
Identifies test packets by the implementation6 tool, useful to
check what packets passed a firewall.
inject_alive6 [-ap] <interface>
This tool answers to keep-alive requests on PPPoE and 6in4 tunnels;
for PPPoE0t also sends keep-alive requests. Note that the appro-
priate environment variable THC_IPV6_{PPPOE|6IN4} must be set. Op-
tion -a will actively send alive requests every 15 seconds. Option
-p will not send replies to alive requests.
inverse_lookup6 <interface> <mac-address>
Performs an inverse address query, to get the IPv6 addresses that
are assigned to a MAC address. Note that only few systems support
this yet.
kill_router6 <interface> <target-ip>
Announce that target router is going down to delete it from the
routing tables. If you supply a '*' as target-ip, this tool will
sniff the network for RAs and immediately send the kill packet.
ndpexhaust26 <interface> [-acpPTUrR] [-s sourceip6] <target-network>
Flood the target /64 network with ICMPv6 TooBig error messages.
This tool version is manyfold more effective than ndpexhaust6. -a
add a hop-by-hop header with router alert. -c do not calcu-
late the checksum to save time. -p send ICMPv6 Echo Requests.
-P send ICMPv6 Echo Reply. -T send ICMPv6 Time-to-live-
exceeded. -U send ICMPv6 Unreachable (no route). -r
randomize the source from your /64 prefix. -R randomize the
source fully. -s sourceip6 use this as source ipv6 address.
ndpexhaust6 <interface> <target-network>
Randomly pings IPs in target network.
node_query6 <interface> <target-ip>
Sends an ICMPv6 node query request to the target and dumps the
replies.
parasite6 <interface> [fake-mac]
This is an "ARP spoofer" for IPv6, redirecting all local traffic to
your own system (or nirvana if fake-mac does not exist) by answer-
ing falsely to Neighbor Solicitation requests, specifying FAKE-MAC
results in a local DOS.
passive_discovery6 <interface> [scriptname]
Passively sniffs the network and dump all client's IPv6 addresses
detected. If scriptname is supplied, it is called with the detected
IPv6 address as first and the interface as second parameters.
randicmp6 <interface> <target-ip>
Sends all ICMPv6 type and code combinations to target.
redir6 <interface> <src-ip> <target-ip> <original-router> <new-router>
[new-router-mac]
Implant a route into src-ip, which redirects all traffic to target-
ip to new-ip. You must know the router which would handle the
route. If the new-router-mac does not exist, this results in a
DOS.
redirsniff6 <interface> <victim-ip> <destination-ip> <original-router>
[<new-router> [new-router-mac]]
Implant a route into victim-ip, which redirects all traffic to des-
tination-ip to new-router. You must know the router which would
handle the route. If the new-router and new-router-mac does not
exist, this results in a DoS.
rsmurf6 <interface> <victim-ip>
Smurfs the local network of the victim. Note: this depends on an
implementation error, currently only verified on Linux (fixed in
current versions). Evil: "ff02::1" as victim will DOS your local
LAN completely.
smurf6 <interface> <victim-ip> [multicast-network-address]
Smurf the target with ICMPv6 echo replies. Target of echo request
is the local all-nodes multicast address if not specified.
sendpees6 <interface> <key_length> <prefix> <victim-ip>
Send SEND neighbor solicitation messages and make target to verify
a lota CGA and RSA signatures.
sendpeesmp6 <interface> <key_length> <prefix> <victim-ip>
Multithreaded version of sendpees6.
trace6 [-d] <interface> targetaddress [port]
A basic but very fast traceroute6 program.
thcping6 <interface> <src6> <dst6> <srcmac> <dstmac> <data>
Craft your special ICMPv6 echo request packet.
thcsyn6 [-AcDrRS] [-p port] [-s source-ip6] <interface> <target> <port>
Flood the target port with TCP-SYN packets. If you supply "x" as
port, it is randomized.
toobig6 <interface> <target-ip> <existing-ip> <mtu>
Implants the specified mtu on the target
SEE ALSO
nmap(1), amap(1), dsniff(8).
AUTHOR
thc-ipv6 was written by van Hauser <vh@thc.org> / THC
The homepage for this toolkit is: https://github.com/vanhauser-thc/thc-
ipv6
This manual page was written by Maykel Moya <mmoya@mmoya.org> and Arturo
Borrero Gonzalez <arturo@debian.org>, for the Debian project (but may be
used by others). It's based on previous work by Michael Gebetsroither
<gebi@grml.org>.
Summer 2015 ATTACK-TOOLKIT6 THC-IPv6(8)
root@kali:~# man atk6-extract_networks6
THC-IPv6(8) System Manager's Manual THC-IPv6(8)
NAME
The Hacker Choice's IPv6 Attack Toolkit (aka thc-ipv6)
SYNOPSIS
tool [options] ...
DESCRIPTION
This manual page briefly documents each of the attack-toolkit6
tools. Not all options are listed here, to see the full list of op-
tions of each tool please invoke them with -h.
Note that on Debian (if you read this on Debian) command names are
prefixed with atk6- , so for example the tool alive6 should be in-
voked as atk6-alive6. This is a Debian-only modification.
address6 <mac-address/ipv4-address/ipv6-address> [ipv6-prefix]
Converts a mac or ipv4 address to an ipv6 address (link local if no
prefix is given as 2nd option) or, when given an ipv6 address,
prints the mac or ipv4 address. Prints all possible variations. Re-
turns -1 on errors or the number of variations found.
alive6 <interface> [unicast-or-multicast-address [remote-router]]
Shows alive addresses in the segment. If you specify a remote
router, the packets are sent with a routing header prefixed by
fragmentation.
covert_send6 <interface> <target> <file> [port]
Sends the content of FILE covertly to the target.
covert_send6d <interface> <file>
Writes received covertly content to FILE.
denial6 <interface> <destination> <test-case-number>
Performs various denial of service attacks on a target.
detect_sniffer6 <interface> [target-ip]
Tests if systems on the local LAN are sniffing. Works against Win-
dows, Linux, OS/X and *BSD systems.
dnssecwalk [-e46] <dns-server> <domain>
Performs DNSSEC NSEC walking.
dos_mld <interface>
This tools prevents new ipv6 interfaces to come up, by sending an-
swers to duplicate ip6 checks (DAD). This results in a DOS for new
ipv6 devices.
dos-new-ip6 <interface>
This tools prevents new ipv6 interfaces to come up, by sending an-
swers to duplicate ip6 checks (DAD). This results in a DOS for new
ipv6 devices.
detect-new-ip6 <interface> [scriptname]
This tools detects new ipv6 addresses joining the local network.
If scriptname is supplied, it is executed with the detected IPv6
address as option.
dnsdict6 [-t THREADS] <domain> [dictionary-file]
Enumerates a domain for DNS entries, it uses a dictionary file if
supplied or a built-in list otherwise.
dnsrevenum6 <dns-server> <ipv6-address>
Performs a fast reverse DNS enumeration.
dump_router6 <interface>
Dumps all local routers and their information.
dump_dhcp6 <interface>
Dumps all DHCPv6 servers and their information
exploit6 <interface> <destination> [test-case-number]
Performs exploits of various CVE known IPv6 vulnerabilities on the
destination.
extract_hosts6 <file>
Prints the host parts of ipv6 addresses in file.
extract_networks6 <interface>
Prints the networks found in file.
fake_advertise6 <interface> <ip-address> [target-address [own-mac-ad-
dress]]
Advertise ipv6 address on the network (with own mac if not defined)
sending it to the all-nodes multicast address if no target speci-
fied.
fake_dhcps6 <interface> <network-address/prefix-length> <dns-server>
Fake DHCPv6 server. Used to configure an address and set a DNS
server.
fake_dns6d <interface> <ipv6-address>
Fake DNS server that serves the same IPv6 address to any lookup re-
quest.
fake_dnsupdate6 <dns-server> <fqdn> <ipv6-address>
Send false DNS update requests.
fake_mipv6 <interface> <home-address> <home-agent-address> <care-of-ad-
dress>
If the mobile IPv6 home-agent is mis-configured to accept MIPV6 up-
dates without IPSEC, this will redirect all packets for home-ad-
dress to care-of-address.
fake_mld6 <interface> <multicast-address> [[target-address] [[ttl] [[own-
ip] [own-mac-address]]]]
Advertise yourself in a multicast group of your choice.
fake_mld26 [-l] <interface> <add|delete|query> [multicast-address [target-
address [ttl [own-ip [own-mac-address [destination-mac-address]]]]]]
This uses the MLDv2 protocol. Only a subset of what the protocol is
able to do is possible to implement via a command line.
fake_mldrouter6 [-l] <interface> <advertise|solicitate|terminate> [own-ip
[own-mac-address]]
Announce, delete or solicitate MLD router - yourself or others.
fake_pim6 [-t ttl] [-s src6] [-d dst6] <interface> {<hello> [dr_prior-
ity]|{join|prune} <neighbor6> <multicast6> <target6>}
The hello command takes optionally the DR priority (default: 0).
fake_router6 <interface> <router-ip-link-local
network-address/prefix-length> <mtu> [mac-address] Announce your-
self as a router and try to become the default router. If a non-
existing mac-address is supplied, this results in a DOS.
fake_router26 <interface>
Like fake_router6 with more options available.
fake_solicitate6 <interface> <solicited-ip>
Solicits IPv6 address on the network, sending it to the all-nodes
multicast address.
firewall6 [-u] <interface> <destination> <port> [test-case-no]
Performs various ACL bypass attempts to check implementations. De-
faults to TCP ports, option -u switches to UDP. For all test cases
to work, ICMPv6 ping to the destination must be allowed.
flood_advertise6 <interface>
Flood the local network with neighbor advertisements.
flood_dhcpc6 <interface> [domain-name]
DHCP client flooder. Use to deplete the IP address pool a DHCP6
server is offering. Note: if the pool is very large, this is rather
senseless.
flood_mld6 <interface>
Flood the local network with MLD reports.
flood_mld26 <interface>
Flood the local network with MLDv2 reports.
flood_mldrouter6 <interface>
Flood the local network with MLD router advertisements.
flood_redir6 [-HFD] interface [target] [oldrouter [newrouter]]
Flood a target with ICMPv6 redirects
flood_router6 <interface>
Flood the local network with router advertisements.
flood_router26 <interface>
Similar to flood_router6 but with more options available.
flood_rs6 [-sS] interface [target]
Flood a network with ICMPv6 router solicitation messages
flood_solicitate6 <interface> [target-ip]
Flood the network with neighbor solicitations.
four2six [-FHD] [-s src6] interface ipv6-to-ipv4-gateway ipv4-src ipv4-dst
[port]
Send (spoofed) packets over a 4to6 tunnel (IPv4 packets over IPv6
networks)
fragmentation6 <interface> <target-ip>
Performs fragment firewall and implementation checks, including de-
nial-of-service.
fuzz_ip6 [-x] [-t number | -T number] [-p number] [-IFSDHRJ]
[-1|-2|-3|-4|-5|-6|-7] <interface> <unicast-or-multicast-address> [ad-
dress-in-data-pkt]
Fuzzes an icmp6 packet.
fuzz_dhcpc6 [-1|-2|-3|-4|-5|-6|-7|-8|-9|-A|-B|-C|-D|-m] [-f mac] [-l link]
[-v ipv6] [-x xid] [-c client] [-o options] interface
Fuzzes messages sent to a DHCPv6 client.
fuzz_dhcps6 [-t number | -T number] [-e number | -T number] [-p number]
[-md] [-1|-2|-3|-4|-5|-6|-7|-8] interface [domain-name]
Fuzzes a DHCPv6 server on specified packet types. implementation6
<interface> <destination> [test-case-number] Performs some ipv6 im-
plementation checks, can be used to test firewalls too.
implementation6d <interface>
Identifies test packets by the implementation6 tool, useful to
check what packets passed a firewall.
inject_alive6 [-ap] <interface>
This tool answers to keep-alive requests on PPPoE and 6in4 tunnels;
for PPPoE0t also sends keep-alive requests. Note that the appro-
priate environment variable THC_IPV6_{PPPOE|6IN4} must be set. Op-
tion -a will actively send alive requests every 15 seconds. Option
-p will not send replies to alive requests.
inverse_lookup6 <interface> <mac-address>
Performs an inverse address query, to get the IPv6 addresses that
are assigned to a MAC address. Note that only few systems support
this yet.
kill_router6 <interface> <target-ip>
Announce that target router is going down to delete it from the
routing tables. If you supply a '*' as target-ip, this tool will
sniff the network for RAs and immediately send the kill packet.
ndpexhaust26 <interface> [-acpPTUrR] [-s sourceip6] <target-network>
Flood the target /64 network with ICMPv6 TooBig error messages.
This tool version is manyfold more effective than ndpexhaust6. -a
add a hop-by-hop header with router alert. -c do not calcu-
late the checksum to save time. -p send ICMPv6 Echo Requests.
-P send ICMPv6 Echo Reply. -T send ICMPv6 Time-to-live-
exceeded. -U send ICMPv6 Unreachable (no route). -r
randomize the source from your /64 prefix. -R randomize the
source fully. -s sourceip6 use this as source ipv6 address.
ndpexhaust6 <interface> <target-network>
Randomly pings IPs in target network.
node_query6 <interface> <target-ip>
Sends an ICMPv6 node query request to the target and dumps the
replies.
parasite6 <interface> [fake-mac]
This is an "ARP spoofer" for IPv6, redirecting all local traffic to
your own system (or nirvana if fake-mac does not exist) by answer-
ing falsely to Neighbor Solicitation requests, specifying FAKE-MAC
results in a local DOS.
passive_discovery6 <interface> [scriptname]
Passively sniffs the network and dump all client's IPv6 addresses
detected. If scriptname is supplied, it is called with the detected
IPv6 address as first and the interface as second parameters.
randicmp6 <interface> <target-ip>
Sends all ICMPv6 type and code combinations to target.
redir6 <interface> <src-ip> <target-ip> <original-router> <new-router>
[new-router-mac]
Implant a route into src-ip, which redirects all traffic to target-
ip to new-ip. You must know the router which would handle the
route. If the new-router-mac does not exist, this results in a
DOS.
redirsniff6 <interface> <victim-ip> <destination-ip> <original-router>
[<new-router> [new-router-mac]]
Implant a route into victim-ip, which redirects all traffic to des-
tination-ip to new-router. You must know the router which would
handle the route. If the new-router and new-router-mac does not
exist, this results in a DoS.
rsmurf6 <interface> <victim-ip>
Smurfs the local network of the victim. Note: this depends on an
implementation error, currently only verified on Linux (fixed in
current versions). Evil: "ff02::1" as victim will DOS your local
LAN completely.
smurf6 <interface> <victim-ip> [multicast-network-address]
Smurf the target with ICMPv6 echo replies. Target of echo request
is the local all-nodes multicast address if not specified.
sendpees6 <interface> <key_length> <prefix> <victim-ip>
Send SEND neighbor solicitation messages and make target to verify
a lota CGA and RSA signatures.
sendpeesmp6 <interface> <key_length> <prefix> <victim-ip>
Multithreaded version of sendpees6.
trace6 [-d] <interface> targetaddress [port]
A basic but very fast traceroute6 program.
thcping6 <interface> <src6> <dst6> <srcmac> <dstmac> <data>
Craft your special ICMPv6 echo request packet.
thcsyn6 [-AcDrRS] [-p port] [-s source-ip6] <interface> <target> <port>
Flood the target port with TCP-SYN packets. If you supply "x" as
port, it is randomized.
toobig6 <interface> <target-ip> <existing-ip> <mtu>
Implants the specified mtu on the target
SEE ALSO
nmap(1), amap(1), dsniff(8).
AUTHOR
thc-ipv6 was written by van Hauser <vh@thc.org> / THC
The homepage for this toolkit is: https://github.com/vanhauser-thc/thc-
ipv6
This manual page was written by Maykel Moya <mmoya@mmoya.org> and Arturo
Borrero Gonzalez <arturo@debian.org>, for the Debian project (but may be
used by others). It's based on previous work by Michael Gebetsroither
<gebi@grml.org>.
Summer 2015 ATTACK-TOOLKIT6 THC-IPv6(8)
root@kali:~# atk6-fake_advertise6 -h atk6-fake_advertise6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_advertise6 [-DHF] [-Ors] [-n count] [-w seconds] interface ip-address-advertised [target-address [mac-address-advertised [source-ip-address]]] Advertise IPv6 address on the network (with own mac if not specified), sending it to the all-nodes multicast address if no target address is set. Source ip address is the address advertised if not set. Sending options: -n count send how many packets (default: forever) -w seconds wait time between the packets sent (default: 5) -m srcmac the srcmac address to send from (not what is advertised! Flag options: -O do NOT set the override flag (default: on) -r DO set the router flag (default: off) -s DO set the solicitate flag (default: off) ND Security evasion options (can be combined): -F full evasion attack (no other evasion options allowed) -H add a hop-by-hop header -f add a one shot fragment header (can be specified multiple times) -D add a large destination header which fragments the packet.
root@kali:~# atk6-fake_dhcps6 -h atk6-fake_dhcps6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_dhcps6 interface network-address/prefix-length dns-server [dhcp-server-ip-address [mac-address]] Fake DHCPv6 server. Use to configure an address and set a DNS server
root@kali:~# atk6-fake_dns6d -h atk6-fake_dns6d 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_dns6d interface ipv6-address [fake-ipv6-address [fake-mac]] Fake DNS server that serves the same IPv6 address to any lookup request You can use this together with parasite6 if clients have a fixed DNS server Note: very simple server. Does not honor multiple queries in a packet, norNS, MX, etc. lookups.
root@kali:~# atk6-fake_dnsupdate6 -h atk6-fake_dnsupdate6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_dnsupdate6 dns-server full-qualified-host-dns-name ipv6address Example: atk6-fake_dnsupdate6 dns.test.com myhost.sub.test.com ::1
root@kali:~# atk6-fake_mipv6 -h atk6-fake_mipv6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_mipv6 interface home-address home-agent-address care-of-address If the mobile IPv6 home-agent is mis-configured to accept MIPV6 updates without IPSEC, this will redirect all packets for home-address to care-of-address
root@kali:~# atk6-fake_mld26 -h atk6-fake_mld26 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_mld26 [-l] interface add|delete|query [multicast-address [target-address-to-subscribe-from [ttl [own-ip [own-mac-address [destination-mac-address]]]]]] This uses the MLDv2 protocol. Only a subset of what the protocol is able to do is possible to implement via a command line. Code it if you need something. Ad(d)vertise or delete yourself - or anyone you want - in a multicast group of your choice Query ask on the network who is listening to multicast addresses Use -l to loop and send (in 5s intervals) until Control-C is pressed.
root@kali:~# atk6-fake_mld6 -h atk6-fake_mld6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_mld6 [-l] interface add|delete|query [multicast-address [ttl [own-ip [own-mac-address [destination-mac-address]]]]] Ad(d)vertise or delete yourself - or anyone you want - in a multicast group of your choice Query ask on the network who is listening to multicast addresses Use -l to loop and send (in 5s intervals) until Control-C is pressed.
root@kali:~# atk6-fake_mldrouter6 -h atk6-fake_mldrouter6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_mldrouter6 [-l] interface advertise|solicitate|terminate [own-ip [own-mac-address]] Announce, delete or soliciated MLD router - sourself or others. Use -l to loop and send (in 5s intervals) until Control-C is pressed.
root@kali:~# atk6-fake_pim6 -h atk6-fake_pim6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_pim6 [-l|-f] [-t ttl] [-s src6] [-d dst6] interface hello [dr_priority] atk6-fake_pim6 [-l|-f] [-t ttl] [-s src6] [-d dst6] interface bootstrap bsr6 [bsr_prio [rp6]] atk6-fake_pim6 [-l|-f] [-t ttl] [-s src6] [-d dst6] interface assert multicast6 [metric [sender6]] atk6-fake_pim6 [-l|-f] [-t ttl] [-s src6] [-d dst6] interface join|prune neighbor6 multicast6 target6 Options: -l loop packet every 5 seconds -f flood packet (with random values where useful, e.g src) -t ttl specify a non-standard ttl -s src6 specify the source IPv6 address -d dst6 specify a non-standard destination IPv6 address The hello command takes optionally the DR priority (default: 0). The join and prune commands need the multicast group to modify, the target address that joins or leavs and the neighbor PIM router The bootstrap command needs the bootstraprouter address and optional its priority and the rendevouz-point. The assert command needs the concerning multicast address and optional its metric and multicast sender.
root@kali:~# atk6-fake_router26 -h
atk6-fake_router26 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6
Syntax: atk6-fake_router26 [-E type] [-A network/prefix] [-R network/prefix] [-D dns-server] [-s sourceip] [-S sourcemac] [-ardl seconds] [-Tt ms] [-n no] [-i interval] interface [target]
Options:
-A network/prefix add autoconfiguration network (up to 16 times)
-a seconds valid lifetime of prefix -A (defaults to 99999)
-R network/prefix add a route entry (up to 16 times)
-r seconds route entry lifetime of -R (defaults to 4096)
-D dns-server specify a DNS server (up to 16 times)
-L searchlist specify the DNS domain search list, separate entries with ,
-d seconds dns entry lifetime of -D (defaults to 4096
-M mtu the MTU to send, defaults to the interface setting
-s sourceip the source ip of the router, defaults to your link local
-S sourcemac the source mac of the router, defaults to your interface
-f ethernetmac the ethernet mac address to use to send the frames
-l seconds router lifetime (defaults to 2048)
-T ms reachable timer (defaults to 0)
-t ms retrans timer (defaults to 0)
-p priority priority "low", "medium", "high" (default), "reserved"
-F flags Set one or more of the following flags: managed, other,
homeagent, proxy, reserved; separate by comma
-E type Router Advertisement Guard Evasion option. Types:
F full evasion (Windows and FreeBSD)
H simple hop-by-hop header
1 simple one-shot fragmentation header (can add multiple)
D insert a large destination header so that it fragments
O overlapping fragments for keep-first targets (Win, BSD, Mac)
o overlapping fragments for keep-last targets (Linux, Solaris)
Examples: -E H111, -E D
-m mac-address if only one machine should receive the RAs (not with -E DoO)
-i interval time between RA packets (default: 5)
-n number number of RAs to send (default: unlimited)
-X clean up by de-announcing fake router (default: disabled)
Announce yourself as a router and try to become the default router.
If a non-existing link-local or mac address is supplied, this results in a DOS.
root@kali:~# atk6-fake_router6 -h atk6-fake_router6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_router6 [-HFD] interface network-address/prefix-length [dns-server [router-ip-link-local [mtu [mac-address]]]] Announce yourself as a router and try to become the default router. If a non-existing link-local or mac address is supplied, this results in a DOS. Option -H adds hop-by-hop, -F fragmentation header and -D dst header.
root@kali:~# atk6-fake_solicitate6 -h atk6-fake_solicitate6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fake_solicitate6 [-DHF] interface ip-address-solicitated [target-address [mac-address-solicitated [source-ip-address]]] Solicate IPv6 address on the network, sending it to the all-nodes multicast address
root@kali:~# atk6-firewall6 -h atk6-firewall6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-firewall6 [-Hu] interface destination port [test-case-no] Performs various ACL bypass attempts to check implementations. Defaults to TCP ports, option -u switches to UDP. Option -H prints the hop count. For all test cases to work, ICMPv6 ping to the destination must be allowed.
root@kali:~# atk6-flood_advertise6 -h atk6-flood_advertise6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_advertise6 [-k | -m mac] interface [target] Flood the local network with neighbor advertisements. Option -k sends with your real src mac, -m with a specified src mac, random for each packet otherwise.
root@kali:~# atk6-flood_dhcpc6 -h atk6-flood_dhcpc6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_dhcpc6 [-n|-N] [-1] [-d domain-name] interface [dhcpserver] DHCP client flooder. Use to deplete the IP address pool a DHCP6 server is offering. Note: if the pool is very large, this is rather senseless. :-) By default the link-local IP MAC address is random, however this won't work in some circumstances. -n will use the real MAC, -N the real MAC and link-local address. -1 will only solicate an address but not request it. If -N is not used, you should run parasite6 in parallel. Use -d to force DNS updates, you must specify a domain name.
root@kali:~# atk6-flood_mld26 -h atk6-flood_mld26 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_mld26 interface [target] [max_count] Flood the local network with MLDv2 reports.
root@kali:~# atk6-flood_mld6 -h atk6-flood_mld6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_mld6 interface [target] Flood the local network with MLD reports.
root@kali:~# atk6-flood_mldrouter6 -h atk6-flood_mldrouter6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_mldrouter6 interface [target] Flood the local network with MLD router advertisements.
root@kali:~# atk6-flood_redir6 -h atk6-flood_redir6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_redir6 [-HFD] interface [target] [oldrouter [newrouter]] Flood the local network with ICMPv6 redirect packets. -F/-D/-H add fragment/destination/hopbyhop header to bypass simple filters -a adds hopbyhop with router alert
root@kali:~# atk6-flood_router26 -h atk6-flood_router26 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_router26 [-HFD] [-sSG] [-RPA] interface [target] Flood the local network with router advertisements. Each packet contains ~25 prefix and route enries Modes: default sends both routing entries and prefix information -R does only send routing entries, no prefix information -P does only send prefix information, no routing entries -A an attack to disable privacy extensions Options: -a add a hopbyhop header with router alert -H add a hopbyhop header to bypass RA guard security -f add an atomic fragment header to bypass RA guard security -D add a large destination header to bypass RA guard security -F perform full RA guard evasion (disallows all other bypass options) -s use small lifetimes, resulting in a more devasting impact -S performs a slow start, which can increases the impact -G gigantic packet of 64kb of prefix/route entries -m add DHCPv6 managed/other flags to RA
root@kali:~# atk6-flood_router6 -h atk6-flood_router6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_router6 [-HFD] interface Flood the local network with router advertisements. -F/-D/-H add fragment/destination/hopbyhop header to bypass RA guard security.
root@kali:~# atk6-flood_rs6 -h atk6-flood_rs6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_rs6 [-sS] interface [target] Flood the local network with ICMPv6 Router Soliciation packets. Option -s uses random source IPv6 addresses. Option -S also randomizes the MAC.
root@kali:~# atk6-flood_solicitate6 -h atk6-flood_solicitate6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_solicitate6 [-k | -m mac] [-a] interface [target [query-address]] Flood the network with neighbor solicitations. if not supplied, target is random and query address is ff02::1 Use -a to add a hopbyhop header with router alert, -k to send with your real mac, -m to specify a mac or its randomized otherwise.
root@kali:~# atk6-flood_unreach6 -h atk6-flood_unreach6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-flood_unreach6 [-HFD] [-p|-h] [-r|-R] interface target Flood the target with ICMPv6 unreachable packets. -F/-D/-H add fragment/destination/hopbyhop header to bypass simple filters -p/-h send port/host unreachable instead of network unreachable -r/-R randomize source from /64 / randomize source completely
root@kali:~# atk6-four2six -h atk6-four2six 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-four2six [-FHD] [-m srcmac] [-s src6] [-p srcport] interface ipv6-to-ipv4-gateway ipv4-src ipv4-dst [port] Options: -F insert atomic fragment header (can be set multiple times) -H insert and empty hop-by-hop header -D insert a large destination header that fragments the packet -p srcport set a specific UDP source port or Ping ID -s src6 set a specific IPv6 source address -m srcmac set a specific MAC source address Send an IPv4 packet to an IPv6 4to6 gateway. If a port is specified, a UDP packet is sent, otherwise an ICMPv4 ping.
root@kali:~# atk6-fragmentation6 -h atk6-fragmentation6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fragmentation6 [-fp] [-n number] interface destination [test-case-no] -f activates flooding mode, no pauses between sends; -p disables first and final pings, -n number specifies how often each test is performed Performs fragment firewall and implementation checks, incl. denial-of-service.
root@kali:~# atk6-fragrouter6 -h fragrouter6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fragrouter6 [-dv -f len -e count -t count] INTERFACE EVASION-METHOD Options: -f len size of mini fragments (option 64, default 8) -e count hop count to the IDS for evading (option 256 & 512) -t count hop count to the target that reaches it -v verbose mode, print all packets processed for evasion Evasion Methods: 0 no manipulation 1-31 the number of atomic fragmentation headers to insert 32 use destination headers for 1-31 instead of fragmentation headers 64 fragment each packet to 8 byte length pieces (or change with -f) 128 a large destination header that fragments the packet 256 insert fake TCP data with a hop count just for the IDS (-e) 512 insert TCP connection reset packet with a hop count just to the IDS (-e) 1024 insert fake fragmentation data with a hop count just for the IDS (-e) 2048 insert faked seq/ack data TCP packet Performs NIDS/NIPS evasion to all defined packets that originate from your system or pass through it. All evasion methods can be combined (add together) with the exception that only either one of 64 or 128 can be used at once. Option 1024 can be used with 1..31 and 64. The evasion methods are processed in the following order: 256, 512, 2048, 1..31/33..63 then either 64 or 128 then 1024. Requires to set up ip6table rules that jump to NFQUEUE, use fragrouter6.sh which is a wrapper for ip6tables and fragrouter6!
root@kali:~# atk6-fuzz_dhcpc6 -h
atk6-fuzz_dhcpc6 3.8 (c) 2020 by Darrell Ambro www.github.com/vanhauser-thc/thc-ipv6
Partially based on code by Brandon Hutcheson and Graeme Neilson
Syntax: atk6-fuzz_dhcpc6 [-1|-2|-3|-4|-5|-6|-7|-8|-9|-A|-B|-C|-D|-m] -f mac -l link -v ipv6 -x xid -c client -o options interface
Options:
-1 fuzz DHCPv6 Solicit
-2 fuzz DHCPv6 Advertise (default)
-3 fuzz DHCPv6 Request
-4 fuzz DHCPv6 Confirm
-5 fuzz DHCPv6 Renew
-6 fuzz DHCPv6 Rebind
-7 fuzz DHCPv6 Reply
-8 fuzz DHCPv6 Release
-9 fuzz DHCPv6 Decline
-A fuzz DHCPv6 Reconfigure
-B fuzz DHCPv6 Information Request
-C fuzz DHCPv6 Relay-Forward
-D fuzz DHCPv6 Relay-reply
-m fuzz the message type as well
-v ipv6 IPv6 address of victim (if not specified DHCP clients sending messages are attacked)
-x xid Transaction ID of victim - zero for random (ignored if -v not specified)
-c client Client ID of victim - zero for random (ignored if -v not specified)
-f mac spoof the mac address
-l link spoof the link address
-o options DHCPv6 message options to send (default: abcdefghijklmonpqr)
a OPTION_SERVERID
b OPTION_IA_NA
c OPTION_IA_TA
d OPTION_IAADR
e OPTION_ORO
f OPTION_PREFERENCE
g OPTION_ELAPSED_TIME
h OPTION_RELAY_MSG
i OPTION_AUTH
j OPTION_UNICAST
k OPTION_STATUS_CODE
l OPTION_RAPID_COMMIT
m OPTION_USER_CLASS
n OPTION_VENDOR_CLASS
o OPTION_VENDOR_OPTS
p OPTION_INTERFACE_ID
q OPTION_RECONF_MSG
r OPTION_RECONF_ACCEPT
Fuzz messages sent to a DHCPv6 client
root@kali:~# atk6-fuzz_dhcps6 -h atk6-fuzz_dhcps6 3.8 (c) 2020 by Brandon Hutcheson, Graeme Neilson and Ryan Ko www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fuzz_dhcps6 [-t number | -T number] [-e number | -T number] [-p number] [-md] [-1|-2|-3|-4|-5|-6|-7|-8] interface [domain-name] Options: -1 fuzz DHCPv6 Solicit (default) -2 fuzz DHCPv6 Request -3 fuzz DHCPv6 Confirm -4 fuzz DHCPv6 Renew -5 fuzz DHCPv6 Rebind -6 fuzz DHCPv6 Release -7 fuzz DHCPv6 Decline -8 fuzz DHCPv6 Information Request -m fuzz the message type as well -t number continue from test no. number -e number continue to test no. number -T number only performs test no. number -n number how many times to send each packet (default: 1) -f spoof mac -F spoof link address -w sec wait number of seconds between packets (default: 0) -p number perform an alive check every number of tests (default: none) -d Use -d to force DNS updates, you can specify a domain name on the commandline. Fuzzes a DHCPv6 packets to a server You can only define one of -0 ... -4 types, defaults to -1. Returns -1 on error, 0 on tests done and targt alive or 1 on target crash.
root@kali:~# atk6-fuzz_ip6 -h atk6-fuzz_ip6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-fuzz_ip6 [-x] [-t number | -T number] [-p number] [-IFSDHRJ] [-X|-1|-2|-3|-4|-5|-6|-7|-8|-9|-0 port|-P type] interface unicast-or-multicast-address [address-in-data-pkt] Fuzzes an IPv6 packet with optional EHs and upper layer transport Options: -X do not add any ICMP/TCP header (transport layer) -1 fuzz ICMP6 echo request (default) -2 fuzz ICMP6 neighbor solicitation -3 fuzz ICMP6 neighbor advertisement -4 fuzz ICMP6 router advertisement -5 fuzz multicast listener report packet -6 fuzz multicast listener done packet -7 fuzz multicast listener query packet -8 fuzz multicast listener v2 report packet -9 fuzz multicast listener v2 query packet -0 fuzz node query packet -s port fuzz TCP-SYN packet against port -P type fuzz PIMv2 type packet (hello, bootstrap, assert) -x tries all 256 values for flag and byte types -t number continue from test no. number -T number only performs test no. number -p number perform an alive check every number of tests (default: none) -a do not perform initial and final alive test -n number how many times to send each packet (default: 1) -I fuzz the IP header too -F add one-shot fragmentation, and fuzz it too (for 1) -S add source-routing, and fuzz it too (for 1) -D add destination header, and fuzz it too (for 1) -H add hop-by-hop header, and fuzz it too (for 1 and 5-9) -R add router alert header, and fuzz it too (for 5-9 and all) -J add jumbo packet header, and fuzz it too (for 1) You can only define one of -0 ... -9, -P and -s, defaults to -1. Note that the -P fuzzing target should be ff02::d Returns -1 on error, 0 on tests done and targt alive or 1 on target crash.
root@kali:~# atk6-implementation6 -h atk6-implementation6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-implementation6 [-p] [-s sourceip6] interface destination [test-case-number] Options: -s sourceip6 use the specified source IPv6 address -p do not perform an alive check at the beginning and end Performs some IPv6 implementation checks, can be used to test some firewall features too. Takes approx. 2 minutes to complete.
root@kali:~# atk6-implementation6d -h atk6-implementation6d 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-implementation6d interface Identifies test packets by the implementation6 tool, useful to check what packets passed a firewall
root@kali:~# atk6-inject_alive6 -h
atk6-inject_alive6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6
Syntax: atk6-inject_alive6 [-ap] interface
This tool answers to keep-alive requests on PPPoE and 6in4 tunnels; for PPPoE
it also sends keep-alive requests.
Note that the appropriate environment variable THC_IPV6_{PPPOE|6IN4} must be set
Option -a will actively send alive requests every 15 seconds.
Option -p will not send replies to alive requests.
root@kali:~# atk6-inverse_lookup6 -h atk6-inverse_lookup6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-inverse_lookup6 interface mac-address Performs an inverse address query, to get the IPv6 addresses that are assigned to a MAC address. Note that only few systems support this yet.
root@kali:~# atk6-kill_router6 -h atk6-kill_router6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-kill_router6 [-HFD] interface router-address [srcmac [dstmac]] Announce that a target a router going down to delete it from the routing tables. If you supply a '*' as router-address, this tool will sniff the network for any RA packet and immediately send the kill packet. Option -H adds hop-by-hop, -F fragmentation header and -D dst header.
root@kali:~# atk6-ndpexhaust26 -h atk6-ndpexhaust26 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-ndpexhaust26 [-acpPTUrRm] [-s sourceip6] interface target-network Options: -a add a hop-by-hop header with router alert -c do not calculate the checksum to save time -p send ICMPv6 Echo Requests -P send ICMPv6 Echo Reply -T send ICMPv6 Time-to-live-exeeded -U send ICMPv6 Unreachable (no route) -r randomize the source from your /64 prefix -R randomize the source fully -m generate a maximum size packet -s sourceip6 use this as source IPv6 address Flood the target /64 network with ICMPv6 TooBig error messages. This tool version is manyfold more effective than ndpexhaust6.
root@kali:~# atk6-ndpexhaust6 -h ! ! Please note: ndpexhaust6 is deprecated, please use ndpexhaust26! ! atk6-ndpexhaust6 by mario fleischmann <mario.fleischmann@1und1.de> Syntax: atk6-ndpexhaust6 interface destination-network [sourceip] Randomly pings IPs in target network
root@kali:~# atk6-node_query6 -h atk6-node_query6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-node_query6 interface target Sends an ICMPv6 node query request to the target and dumps the replies.
root@kali:~# atk6-parasite6 -h atk6-parasite6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-parasite6 [-lRFHD] interface [fake-mac] This is an "ARP spoofer" for IPv6, redirecting all local traffic to your own system (or nirvana if fake-mac does not exist) by answering falsely to Neighbor Solitication requests Option -l loops and resends the packets per target every 5 seconds. Option -R will also try to inject the destination of the solicitation NS security bypass: -F fragment, -H hop-by-hop and -D large destination header
root@kali:~# atk6-passive_discovery6 -h
atk6-passive_discovery6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6
Syntax: atk6-passive_discovery6 [-Ds] [-m maxhop] [-R prefix] interface [script]
Options:
-D do also dump destination addresses (does not work with -m)
-s do only print the addresses, no other output
-m maxhop the maximum number of hops a target which is dumped may be away.
0 means local only, the maximum amount to make sense is usually 5
-R prefix exchange the defined prefix with the link local prefix
Passivly sniffs the network and dump all client's IPv6 addresses detected.
Note that in a switched environment you get better results when additionally
starting parasite6, however this will impact the network.
If a script name is specified after the interface, it is called with the
detected ipv6 address as first and the interface as second option.
root@kali:~# atk6-randicmp6 -h Syntax: atk6-randicmp6 [-p] [-s sourceip] interface destination [type [code]] Sends all ICMPv6 type and code combinations to destination. Option -s sets the source IPv6 address. Option -p will not print answers received.
root@kali:~# atk6-redir6 -h atk6-redir6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-redir6 interface victim-ip target-ip original-router new-router [new-router-mac] [hop-limit] Implant a route into victim-ip, which redirects all traffic to target-ip to new-ip. You must know the router which would handle the route. If the new-router-mac does not exist, this results in a DOS. If the TTL of the target is not 64, then specify this is the last option.
root@kali:~# atk6-redirsniff6 -h
atk6-redirsniff6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6
Syntax: atk6-redirsniff6 interface victim-ip destination-ip original-router [new-router [new-router-mac]]
Implant a route into victim-ip, which redirects all traffic to destination-ip to
new-router. This is done on all traffic that flows by that matches
victim->target. You must know the router which would handle the route.
If the new-router/-mac does not exist, this results in a DOS.
You can supply a wildcard ('*') for victim-ip and/or destination-ip.
root@kali:~# atk6-rsmurf6 -h atk6-rsmurf6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-rsmurf6 interface victim-ip Smurfs the local network of the victim. Note: this depends on an implementation error, currently only verified on Linux. Evil: "ff02::1" as victim will DOS your local LAN completely
root@kali:~# atk6-sendpees6 -h sendpees6 by willdamn <willdamn@gmail.com> Syntax: atk6-sendpees6 interface key_length prefix victim Send SEND neighbor solicitation messages and make target to verify a lota CGA and RSA signatures
root@kali:~# atk6-sendpeesmp6 -h original sendpees by willdamn <willdamn@gmail.com> modified sendpeesMP by Marcin Pohl <marcinpohl@gmail.com> Code based on thc-ipv6 Syntax: atk6-sendpeesmp6 interface key_length prefix victim Send SEND neighbor solicitation messages and make target to verify a lota CGA and RSA signatures Example: atk6-sendpeesmp6 eth0 2048 fe80:: fe80::1
root@kali:~# atk6-smurf6 -h atk6-smurf6 3.8 (c) 2013 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-smurf6 [-i microseconds] interface victim-ip [multicast-network-address] Smurf the target with icmp echo replies. Target of echo request is the local all-nodes multicast address if not specified
root@kali:~# atk6-thcping6 -h atk6-thcping6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-thcping6 [-EafqxO] [-e ethertype] [-H t:l:v] [-D t:l:v] [-F dst] [-e ethertype] [-L length] [-N nextheader] [-V version] [-t ttl] [-c class] [-l label] [-d size] [-S port|-U port|-T type -C code] interface src6 dst6 [srcmac [dstmac [data]]] Options: -x flood mode (doesn't check for replies) -w ms wait time between packets in ms (default: 1000, if -n not 1) -a add a hop-by-hop header with router alert option. -q add a hop-by-hop header with quickstart option. -E send as ethertype IPv4 -e ethertype send as specified ethertype (hexadecimal!) -H t:l:v add a hop-by-hop header with special content -D t:l:v add a destination header with special content -D "xxx" add a large destination header which fragments the packet -f add a one-shot fragementation header -F ipv6address use source routing to this final destination -t ttl specify TTL (default: 255) -c class specify a class (0-4095) -l label specify a label (0-1048575) -L length set fake payload length (0-65535) -N nextheader set fake next header (0-255) -V version set IP version (0-15) -d data_size define the size of the ping data buffer -O send TCP Fast Open cookie request option (needs -S) -T number ICMPv6 type to send (default: 128 = ping) -C number ICMPv6 code to send (default: 0) -S port use a TCP SYN packet on the defined port instead of ping -U port use a UDP packet on the defined port instead of ping -n count how often to send the packet (default: 1) t:l:v syntax: type:length:value, value is in hex, e.g. 1:2:0eab You can put an "x" into src6, srcmac and dstmac for an automatic value. Craft a ICMPv6/TCP/UDP packet with special IPv6 or EH header options. Returns -1 on error or no reply, 0 on normal reply or 1 on error reply.
root@kali:~# atk6-thcsyn6 -h atk6-thcsyn6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-thcsyn6 [-aAcdDfrORS] [-i microsecond] [-m dstmac] [-p port] [-s sourceip6] interface target port Options: -i sending interval of packets (in microseconds) -a add hop-by-hop header with router alert -d add destination header (can be set up to 64 times) -f add atomic fragmentation header (can be set up to 64 times) -A send TCP-ACK packets -S send TCP-SYN-ACK packets -r randomize the source from your /64 prefix -R randomize the source fully -D randomize the destination (treat as /64) -O add a TCP Fast Open cookie (SYN-only packets) -m dstmac use this destination mac address -s sourceip6 use this as source IPv6 address -p port use fixed source port Flood the target port with TCP-SYN packets. If you supply "x" as port, it is randomized.
root@kali:~# atk6-toobig6 -h atk6-toobig6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-toobig6 [-u] interface target-ip existing-ip mtu [hop-limit] Implants the specified mtu on the target. If the TTL of the target is not 64, then specify this as the last option. Option -u will send the TooBig without the spoofed ping6 from existing-ip.
root@kali:~# atk6-toobigsniff6 -h atk6-toobigsniff6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-toobigsniff6 [-c] interface target mtu Sniff for packte from target and send an ICMPv6 too big error message based on that packet with the MTU specified. If you supply a '*' as-address, any global traffic sniffed will be used. If you supply the option -c the tool will not quit upon first packet match, but continue running and send packets until aborted.
root@kali:~# atk6-trace6 -h atk6-trace6 3.8 (c) 2020 by van Hauser / THC <vh@thc.org> www.github.com/vanhauser-thc/thc-ipv6 Syntax: atk6-trace6 [-abdtu] [-s src6] interface targetaddress [port] Options: -a insert a hop-by-hop header with router alert option. -D insert a destination extension header -E insert a destination extension header with an invalid option -F insert a one-shot fragmentation header -b instead of an ICMP6 Ping, use TooBig (you will not see the target) -B instead of an ICMP6 Ping, use PingReply (you will not see the target) -d resolves the IPv6 addresses to DNS. -t enables tunnel detection -u use UDP instead of TCP if a port is supplied -r raw mode (for adapters networks that have no ethernet) -s src6 specifies the source IPv6 address Maximum hop reach: 31 A basic but very fast traceroute6 program. If no port is specified, ICMP6 Ping requests are used, otherwise TCP SYN packets to the specified port. Options D, E and F can be use multiple times.
address6 Usage Example
root@kali:~# address6 fe80::76d4:35ff:fe4e:39c8 74:d4:35:4e:39:c8 root@kali:~# address6 74:d4:35:4e:39:c8 fe80::76d4:35ff:fe4e:39c8
alive6 Usage Example
root@kali:~# alive6 eth0 Alive: fd77:7c68:420a:1:426c:8fff:fe1b:cb90 [ICMP parameter problem] Alive: fd77:7c68:420a:1:20c:29ff:fee5:5bf4 [ICMP echo-reply] Alive: fd77:7c68:420a:1:75d9:4f39:a46a:6f83 [ICMP echo-reply] Alive: fd77:7c68:420a:1:6912:8e80:e02f:1969 [ICMP echo-reply] Alive: fd77:7c68:420a:1:201:6cff:fe6f:ddd1 [ICMP echo-reply]
detect-new-ip6 Usage Example
root@kali:~# detect-new-ip6 eth0 Started ICMP6 DAD detection (Press Control-C to end) ... Detected new ip6 address: fe80::85d:9879:9251:853a
dnsdict6 Usage Example
root@kali:~# dnsdict6 example.com Starting DNS enumeration work on example.com. ... Starting enumerating example.com. - creating 8 threads for 798 words... Estimated time to completion: 1 to 2 minutes www.example.com. => 2606:2800:220:6d:26bf:1447:1097:aa7