This package contains legacy integration scripts for configuring vlan interfaces via ifupdown (/etc/network/interfaces). For further details see vlan-interfaces(5) man page in this package. Please note that this package is not necessary for most VLAN use cases with ifupdown. You only need to install it if you need to support the legacy VLAN naming scheme (vlan0001) or the following extra features it provides: * vlan‐raw‐device * ip‐proxy‐arp * ip‐rp‐filter * hw‐mac‐address It currently also ships a wrapper script for backwards compatibility called vconfig, that replaces the old deprecated vconfig program with translations to ip(route2) commands. This compatibility shim might be dropped in future releases, please use ip(route2) commands directly.
sudo apt install vlan (37 KB)
Dependências: vlan‐raw‐device, ip‐proxy‐arp, ip‐rp‐filter, hw‐mac‐address, iproute2
Escolha um comando ao lado para ver a descrição e a ajuda completa.
vconfig
VLAN (802.1q) configuration program.
root@kali:~# vconfig -h
Usage: add [interface-name] [vlan_id]
rem [vlan-name]
set_flag [interface-name] [flag-num] [0 | 1]
set_egress_map [vlan-name] [skb_priority] [vlan_qos]
set_ingress_map [vlan-name] [skb_priority] [vlan_qos]
set_name_type [name-type]
* The [interface-name] is the name of the ethernet card that hosts
the VLAN you are talking about.
* The vlan_id is the identifier (0-4095) of the VLAN you are operating on.
* skb_priority is the priority in the socket buffer (sk_buff).
* vlan_qos is the 3 bit priority in the VLAN header
* name-type: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),
DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)
* FLAGS: 1 REORDER_HDR When this is set, the VLAN device will move the
ethernet header around to make it look exactly like a real
ethernet device. This may help programs such as DHCPd which
read the raw ethernet packet and make assumptions about the
location of bytes. If you don't need it, don't turn it on, because
there will be at least a small performance degradation. Default
is OFF.